Waterbury Movement

[Chris O]

I'm working on a waterbury clock
It's a four glass clock with rosewood and brass
case
the movement is a round 3 5/8 dia
the all the teeth on the strike barrel are missing or fished hooked.
Can anyone sell me a parts movement?
thanks Chris O

 

[Chris O]

I'm working on a waterbury clock
It's a four glass clock with rosewood and brass
case
the movement is a round 3 5/8 dia
the all the teeth on the strike barrel are missing or fished hooked.
Can anyone sell me a parts movement?
thanks Chris O

 

[gre406]

Chris...What size are the barrels and the tooth count? Diameter and width/depth of barrel?

Geo
NAWCC#78594

 

[Chris O]

Geo, Barrel Dia is 39mm OD and 9/16 deep
90 teeth These are all out side mesurments.
Chris

 

[gre406]

Chris...It was worth a shot. I have four parts movements and one is right outside dia but only 77 tooth. Other looks too big. Do either look familiar?

http://userweb.nni.com/gre406/wbbarl.jpg

Geo
NAWCC#78594

 

[Chris O]

Geo,
no i don't think that will work thanks for trying.
chris

 

[Bill Curley]

I can make part for you if you cannot find a replacement.
Bill
Waterbury CT

 

[Chris O]

Curly,
Basicly all of the teeth would need to be repaired.
please email me with a cost
coclock@visuallink.com
thanks Chris

Edited to make the email address live

[This message was edited by Phil Schilke on January 04, 2004 at 21:00.]