Seth Thomas A206-011 Parts List

[Reuven Gruber]

Where can I get a Parts List (preferably with an exploded diagram) for Seth Thomas A201-011

 

[Willie X]

Look at the 3rd 'similar thread' below. What you seek may not be available and would be of little help if it were available.

Do you have a specific problem? If so a good photo with a good description of the problem, might fetch you some help.

Willie X

 

[Reuven Gruber]

Willyx. Thanks for the reply. I was trying to find out if there needs to be a washer in the clutch. Mine just has a spring and is quite stiff - I was wondering if the stiffness is due to a missing washer.

 

[Willie X]

Can you make a photo, with a toothpick pointing to the "washer" you mention? Wille X

 

[Dick Feldman]

Also----You have yet to mention what the real problem is.
Does the clock not run?
Do the hands not move?
Is there a power issue?
That is an old movement and it will be extremely rare (LIKE IMPOSSIBLE) that it is not worn.
Worn to the extent that there is not enough power to operate the clock movement.
You would be well served to visit your local library and read everything you can find on clock repair by credible authors as well as find a qualified mentor.
JMHO
Dick

 

[Reuven Gruber]

Also----You have yet to mention what the real problem is.
Does the clock not run?
Do the hands not move?
Is there a power issue?
That is an old movement and it will be extremely rare (LIKE IMPOSSIBLE) that it is not worn.
Worn to the extent that there is not enough power to operate the clock movement.
You would be well served to visit your local library and read everything you can find on clock repair by credible authors as well as find a qualified mentor.
JMHO
Dick

Hi Dick
The problem was that the hand clutch was way too stiff

Fortunately the problem is now fixed

Thanks for your reply