Obselete Watch Parts Wanted

[prideofmatchingham]

Re: Watch Parts Wanted

Can anyone help me with the following three items

1. Rolex balance staff Cal 1925
2. Rolex balance staff and winding rod Cal 0564
3. Rolex ratchet wheel cal 4220

If you can,pl send me the message or provide me the link.
Thanks

 

[sderek]

Re: Watch Parts Wanted

Who have you tried? Have you tried the usuals... McCaws, Jules Borel, Cas-ker. Also be sure to try all the suppliers listed in the parts sources sticky, if need be.

 

[prideofmatchingham]

Re: Watch Parts Wanted

Thanks so much sderek. I also mailed to all the mailids you had mentioned in the source you had painstakingly provided.

 

[slinfiniti]

Re: Watch Parts Wanted

I am looking for Hebdomas parts, I have recently acquired Trench style watch that is in need on a new complete balance. I would appreciate any direction. Does anyone know of a good source?

Thank you in advance

 

[slinfiniti]

Re: Watch Parts Wanted

I may have posted this question twice, please feel fee to delete it. I am in search for Hebdomas parts. I need a complete balance. I would appreciate any direction that someone could give me. As always, thank you for your help!

 

[sderek]

Re: Watch Parts Wanted

Can you post pictures of the movement, and tell us about any markings?

 

[slinfiniti]

Re: Watch Parts Wanted

This is what I need according to my watch repair guru:
My movement is 32MM
The length of the balance bridge is 28MM
The diameter of the complete balance is 10MM
I need a mainspring, balance bridge and balance complete.
I would appreciate your help

 

[cbaron]

Re: Watch Parts Wanted

Hi,

I'm looking for an upper balance hole jewel (in setting) for an Elgin 320 0s 7j. Thanks!

-carl

 

[fileofax]

Re: Watch Parts Wanted

Hello
i am seeking parts for my OMEGA CAL 620
HAIRSPRING or complete with balance
both balance jewel clips
and a complete case
Elgin Cal 643
balance jewel cap springs
also they r triangular how to refit them i lost both i had help
Movement Diagram
any help would be most appreciated

 

[prideofmatchingham]

Re: Watch Parts Wanted

I had sent the photos of my moonphase Paul Breguette movement to someone mentioned on the list here. He told me that the movement was Valjoux 90 and that I need a canon pinion of Valjoux 90 triple calendar moonphae useed in Paul Breguette 17 J winding wristwatch.
Pl help. The photos are given here. In one of the photos, you can see R engraved in stylish fashion and 90 embossed. And all the time I thought it to be Record 90 caliber!




POM

 

[slinfiniti]

Re: Watch Parts Wanted

Can you post pictures of the movement, and tell us about any markings?

I have attached Pictures below, I hope this helps.

 

[RodJB]

Re: Watch Parts Wanted

Wanted: stem & crown for omega electronic chronometer f300 - cal 1250 case reference 198.030
the crown needs to be gold color.

 

[ayden2008]

Re: Watch Parts Wanted

I am in need of a Waltham Vanguard 16s 23j minute hand and a crystal. Can anyone please let me know where to find these items or if you have them contact me to purchase them from you. Thank you!

 

[RodJB]

Re: Watch Parts Wanted

Wanted: stem & crown for omega electronic chronometer f300 - cal 1250 case reference 198.030
The crown needs to be gold color.
Not sure if I have enough stem sticking out to attach just a crown.
My case is very worn, I would be even more happy if anyone had a case with crown, I already have the back?

 

[fileofax]

Re: Watch Parts Wanted

Hello
Can any one help me with a few parts i need for several watch movements i have
i will start with this one first
i have a ETA 2472 which i need some of the following bits

401 winding stem
410 winding pinion
415 ratchet wheel
420 crown wheel
1481 reduction gear
1482 driving gear for ratchet wheel
1488 pawl winding wheel complete with pinion
1530 pawl winding wheel without pinion

dont know what caused all these things to be mashed up like a grinder got into it

if anyone can help me where i can get these bits please
thank you
Clinton

 

[sderek]

Re: Watch Parts Wanted

Hi,

I'm looking for an upper balance hole jewel (in setting) for an Elgin 320 0s 7j. Thanks!

-carl

Have you tried Bryan Eyring, Brian Cavanaugh, or Bob McKnight? They have a lot of good used material for American pocket watches. Their contact info is in the part sources sticky.

 

[sderek]

Re: Watch Parts Wanted

Hello
i am seeking parts for my OMEGA CAL 620
HAIRSPRING or complete with balance
both balance jewel clips
and a complete case
Elgin Cal 643
balance jewel cap springs
also they r triangular how to refit them i lost both i had help
Movement Diagram
any help would be most appreciated

Who have you tried? Have you tried the usuals... McCaws, Jules Borel, Cas-ker. Also be sure to try all the suppliers listed in the parts sources sticky, if need be.

Cousinsuk.com has a lot of tech manuals. Also- be sure to give www.watchrepairinfo.com a try.

 

[sderek]

Re: Watch Parts Wanted

Wanted: stem & crown for omega electronic chronometer f300 - cal 1250 case reference 198.030
the crown needs to be gold color.

I'd start with McCaw's in Ohio, and Otto Frei in California. They both stock a lot of Omega parts. But almost any supplier listed in the parts sources may be able to supply the parts.

 

[sderek]

Re: Watch Parts Wanted

I am in need of a Waltham Vanguard 16s 23j minute hand and a crystal. Can anyone please let me know where to find these items or if you have them contact me to purchase them from you. Thank you!

Have you tried Bryan Eyring, Brian Cavanaugh, or Bob McKnight? They have a lot of good used material for American pocket watches. Their contact info is in the part sources sticky.

 

[sderek]

Re: Watch Parts Wanted

Hello
Can any one help me with a few parts i need for several watch movements i have
i will start with this one first
i have a ETA 2472 which i need some of the following bits

401 winding stem
410 winding pinion
415 ratchet wheel
420 crown wheel
1481 reduction gear
1482 driving gear for ratchet wheel
1488 pawl winding wheel complete with pinion
1530 pawl winding wheel without pinion

dont know what caused all these things to be mashed up like a grinder got into it

if anyone can help me where i can get these bits please
thank you
Clinton

Who have you tried? Have you tried the usuals... McCaws, Jules Borel, Cas-ker. Also be sure to try all the suppliers listed in the parts sources sticky, if need be.

 

[Derek Ashenden]

Re: Watch Parts Wanted

I need some anchor pallet jewels for an english pocket watch. Have you any ideas as where I can purchase them in the UK

 

[J_With_Omega]

Re: Watch Parts Wanted

I have an older (1960s or early 70s) Omega Seamaster De Ville wrist watch, and have a couple of questions. A watchsmith told me that the model number on the inside was L-6590. The first question I have is simply: What exact year is this watch? The second related to repair: The watch is missing what I believe is the "bezel". It is a ring that goes around the crystal on the front of the watch. How can I find this part / repair the watch?

 

[tkarter]

Crystal needed

I am trying to locate a crystal for a Hamilton Geneve. Anyone who can supply this will be appreciated.

tk

 

[shinytickythings]

Re: Crystal needed

I'm looking for a crystal for a Seiko . . . late 60's early 70's vintage, not sure of the exact model name.

Case is a Square, Type 1 with a W type crown. Any help would be greatly appreciated.

 

[RodJB]

Re: Watch Parts Wanted

Wanted: I am looking for a 16s Burlington RR bezel & crystal similar to the one pictured.
It reads 50.45mm diameter on my micrometer the inside of the threads measures about 46.08mm.

 

[th90a9]

Re: Case needed/ Anyone help?

still looking but no luck. if anyone has a list of places to check I would appreciate it. tom

 

[Tom Huber]

Re: Case needed/ Anyone help?

I think the people on the MB should know that I have a case with his specs that I offered to sell to him. He balked at the price I was asking. I was asking the price for the weight of the sterling silver in the case. He wanted me to go much lower, and I refused. I don't think that he realizes that these items are not common, especially in the size he is requesting. Also, selling any case at less than scrap value is just asking for it to be scrapped.

Tom

 

[gmorse]

Re: Case needed/ Anyone help?

Hi Tom,

I guess the echoing silence means that nobody has anything to help you. The only place I've seen any quantity of cases is that big auction site, but the vendors often don't know anything about what they're selling, so some detailed questions are needed.

Good luck in your search!

Regards,

Graham

 

[technitype]

Re: Watch Parts Wanted

Trying to fix a Hamilton 4992B GCT watch, and I need a new center wheel.

So far I have had no luck whatsoever. Can anybody help?

 

[Jim Haney]

Re: Watch Parts Wanted

I have some of these. They are a special wheel that is hollow for the sweep second shaft.
Send me a PM.

 

[Laura1971]

Re: Watch Parts Wanted

I am looking for any watch/ clock hand that is luminous (or formerly luminous) due to Promethium luminous paint. Thanks!

Laura

 

[4thdimension]

Re: Watch Parts Wanted

I am looking for any watch/ clock hand that is luminous (or formerly luminous) due to Promethium luminous paint. Thanks!
Laura

Hi Laura,
I think many of us have stocks of luminous hands but what is "Promethium"? Is it a brand name? How could someone determine the origins of a particular luminous paint? Are there particular products this paint is associated with? Are you a lawyer? I am curious what you're looking for. -Cort

 

[4thdimension]

Re: Watch Parts Wanted

Aha! At. no. 61. I forgot that.-Cort

 

[maymoorhead@yahoo.co.uk]

Re: Watch Parts Wanted

Looking for hairspring for Omega 565

Did you get the above part for your watch? Regards May

 

[maymoorhead@yahoo.co.uk]

Re: Watch Parts Wanted

I have a Bulova Military ww 10BNCH and need a sweep second gear.I have a good running movement but it is missing the sweep second gear.
Thanks

Did you get the above part that you require. regards May

 

[maymoorhead@yahoo.co.uk]

Re: Watch Parts Wanted

I am in search for a Marvin 610 escape wheel.

Thanks,

Jan

Did you get the above part that you require. regards May

 

[maymoorhead@yahoo.co.uk]

Re: Watch Parts Wanted

i need a 7733 fly back lever , but not the rounded end type , the one i need has a pointed end set at 90" , possibly a later type, how can i tell if its a valjoux 7733 or an eta 7733 ?

Did you get sorted with the above part? regards May

 

[maymoorhead@yahoo.co.uk]

Re: Watch Parts Wanted

Just to let the admin. know that I have managed to locate the necessary retaining springs required. Knowing the correct KIF part nos. made all the difference, an invaluable piece of knowledge. I purchased a few as I anticipate the potential loss of a couple when setting them.

Obviously, I shall still require a cal. 2135 fork pallet, which I appreciate will be more difficult to locate.

Did you get sorted with pallets for your movement. Regards May

 

[maymoorhead@yahoo.co.uk]

Re: Watch Parts Wanted

I'm looking for a part for the Certina caliber 919-1. I need a new canon pinion/minute pinion and wheel attached to it.
I gave the watch (a DS from around 1980) a complete overhaul, and it is looking absolutely stunning, but the watch is not keeping time because the old part(minute pinion) is broken.
Cab anyone please help me? I'm looking forward to wear the watch!

/
Did you get your material for the mvt. regards May

 

[maymoorhead@yahoo.co.uk]

Re: Watch Parts Wanted

Wanted: stem & crown for omega electronic chronometer f300 - cal 1250 case reference 198.030
the crown needs to be gold color.

Did you get sorted with the above.? regards May

 

[maymoorhead@yahoo.co.uk]

Re: Watch Parts Wanted

Hello
Can any one help me with a few parts i need for several watch movements i have
i will start with this one first
i have a ETA 2472 which i need some of the following bits

401 winding stem
410 winding pinion
415 ratchet wheel
420 crown wheel
1481 reduction gear
1482 driving gear for ratchet wheel
1488 pawl winding wheel complete with pinion
1530 pawl winding wheel without pinion

dont know what caused all these things to be mashed up like a grinder got into it

if anyone can help me where i can get these bits please
thank you
Clinton

Did you get sorted with the above material? You can use my email address- maymoorhead@yahoo.co.uk

 

[maymoorhead@yahoo.co.uk]

Re: Crystal needed

I'm looking for a crystal for a Seiko . . . late 60's early 70's vintage, not sure of the exact model name.

Case is a Square, Type 1 with a W type crown. Any help would be greatly appreciated.

Send me the case reference and I will check the stock. regards May email - maymoorhead@yahoo.co.uk

 

[Novice]

Re: Watch Parts Wanted

I'm in need of an Omega movement calibre 601 if anyone can help, thanks
Age is irrelevant

 

[richiec]

Re: Crystal needed

I am looking for a pallet fork for an 11 jewel, Deuber Watch Co 18 size.

 

[lifeisgud71]

Re: Watch Parts Wanted

I replaced my first watch movement on a Skagen 583XLSXDO (Harley Ronda 706).
All went well except the flying sub-dial hand (.20 x 4mm) I believe.
Can anyone help with parts location?
Thanks in advance and this may be my last watch repair!! These are tiny!!
G

 

[d.weinberg93]

Re: Watch Parts Wanted

In need of a complete pallet for an Elgin 18s pocket watch, Grade 73.

 

[gsrider004]

Re: Watch Parts Wanted

Looking for Bulova 10 BNCH sweep second bridges or someone who can reproduce the part (I can provide an original). I need about 10 of them to complete my military watch restorations.
Also searching for a Longines 11.88 or 11.87 center wheel.

 

[tkarter]

Re: Watch Parts Wanted

In need of an escape wheel for a Seiko 4006A have an otherwise perfect movement.

tk

 

[Jim Haney]

Re: Watch Parts Wanted

I have a Bulova Military ww 10BNCH and need a sweep second gear.I have a good running movement but it is missing the sweep second gear.

Thanks

 

[bdbill]

Re: Watch Parts Wanted

Wanted: A correct minute hand for a 1905 Ball Waltham 16s pocket watch.