HELP!!

wow

Registered User
NAWCC Member
Jun 24, 2008
4,466
361
83
75
Pineville, La. (central La.)
Country
Region
I’m putting together a Sessions bim bam out of a tambour clock and I can’t figure out where this little strike arbor goes. I know where it goes in the plate but I can’t figure out what it does or which way it goes in. I took a couple of photos of it in the movement where it goes but is it right? Upside down? Help appreciated.
Obviously I did not take a photo of it before disassembly.

BB0FC658-5965-4659-B7F1-B81248772CCC.jpeg 0015F8C4-3E7F-456C-A836-8B1195D9FB1A.jpeg 031F3419-29B7-441D-8133-49E3ED983E26.jpeg 478B3750-A9C9-4FC7-8E7E-031BE1EF2CF2.jpeg
 
Last edited:

Isaac

Registered User
Aug 5, 2013
973
182
43
Country
Region
Does the movement do a passing strike for the half hour? If it does, that means that the arbor will have to lift the hammer and engage with the minute wheel's "prongs" somehow.
 

wow

Registered User
NAWCC Member
Jun 24, 2008
4,466
361
83
75
Pineville, La. (central La.)
Country
Region
Does the movement do a passing strike for the half hour? If it does, that means that the arbor will have to lift the hammer and engage with the minute wheel's "prongs" somehow.
That’s it, Isaac. It goes like this:
Thanks!

DDCEA87D-F507-48B4-A3B1-276998AE57E3.jpeg
 
Our 2021 National Meeting in Hampton Roads Virginia
Topic related ad experiment
Know Your NAWCC Forums Rules!
RULES & GUIDELINES

Find member

Forum statistics

Threads
160,876
Messages
1,395,754
Members
82,881
Latest member
Richard Dickson
Encyclopedia Pages
1,099
Total wiki contributions
2,787
Last edit
How to wire a 24 volt secondary for a 12 volt ITR/IBM Master clock system by Toughtool