CRASH COURSE IN CLOCK REPAIR

Discussion in 'Hints & How-to's' started by bangster, Jul 5, 2020.

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. bangster

    bangster Moderator
    NAWCC Member

    Jan 1, 2005
    19,757
    416
    83
    utah
    Country Flag:
    Region Flag:
    #1 bangster, Jul 5, 2020
    Last edited: Jul 5, 2020
    CRASH COURSE IN CLOCK REPAIR
    1. Take off the top plate.
    2. Take several pictures, so you'll know where the parts go
    3. Take the parts out. Try to keep the trains separated.
    4. Clean the parts. Peg out the holes in the plates.
    5. Stand all the wheels up in their original places.
    6. Put the top plate on top. Get the two bottom pillars in their holes. Put on nuts for a turn or two.
    7. Worry the top pivots into their holes one at a time. Use a "pivot getter" of some kind.
    8. Start at the bottom of the train. Start with the pivot that has the most resistance to being moved.
    9. When all the pivots are in place, put on the other pillar nuts on.
    10. Celebrate a job well done. :)

    pivot getter.jpg
    Push-pull pivot getter made from screwdriver.
     

Share This Page