WHAT'S HERE SO FAR? (Note: Despite what it says elsewhere, David LaBounty originated this thread, following a request by another member.) (Table of Contents...numbers are Post #'s) 2.Clock Parts Terminology • 2. Chiming clock movement 3.Count-wheel strike elements 4. Deadbeat Escapement 6. Platform Escapement 7. Hairspring Lever Escapement 8. Hermle Floating & Hairspring Balances 9. Generic count-wheel train 10. Clock Dictionary Link 11. Strip Pallet - Recoil Escapement 12. Count Wheel Lever Assemblies 13. Grand Sonnerie Movement 14. Elements of the Rack Strike 15. Hermle Chiming Movement 16. Urgos Chiming Movement 17. Count Wheel Movement-Annotated 18. Wheels 1 19. Wheels 2 20. Preacher (Tool) 21. Pronouncing Clock Names
American strike movement lever terminology... Ref. "The Levers of American Striking Movements", David J. LaBounty, CMC FBHI, pg. 3, fig. 1.
Deadbeat escapement parts terminology Hey Joe- I'm sure Scottie can easily provide a drawing but I happen to have this one handy...
Deadbeat escapement description THANKS LAB! JB, you can readily see the sequence here. Escape wheel is moving CW. 1. A tooth lands on ENTrance LOCKing face and continues sliding across it. This sliding motion and distance is called OVERSWING. During this slide and overswing, wheel freezes - motionless - ergo - deadbeat. 2. As pendulum returns, tooth meets IMPULSE or LIFT face and there, tooth pushes against face providing impulse to pendulum. 3. After a brief moment or gap, called, "DROP", a tooth lands on LOCK face of EXIT pallet. Again it glides across the face during overswing. Pendulum returns again and another impulse provided to pendulum as tooth pushes against EXIT impulse (LIFT) face. Drop precedes next entrance lock. The terms used in this diagram are the same for a RECOIL escapement altho there are two differences in motion and design. 1. After lock, pallet pushes wheel and entire train backwards - ergo recoil. It is the energy or potential stored in this recoil that provides impulse to the pendulum therefore; 2. There are no impulse faces on the pallets and the pallet angles will differ from a deadbeat.
Re: Different Mainspring Arbors Hey Scottie- Here's the platform escapement parts diagram you requested...
Ran across this and thought it might help clarify things when a problem is being sorted out. http://clock-dictionary.com/ Pretty general in terms. Just a supplement to the thread we already have..
Wheels, 1 Big gears are "wheels" Little gears are "pinions" "Lantern pinions" have round "trundles" instead of teeth "Cut Pinions" have teeth, called "leaves"