Separate names with a comma.
Gazo used Urgos and Jauch movements. Looks like a Jauch
Your desire to repair has to out weigh your problems with customers. Customers have no clue as to the mechanics and better to not teach them to...
I posted a post on how to repair this By drilling and pinning the cannon pinion Go check it out
Why not call them
You basically can't clean this type of painted dial.
Show the big picture of the whole movement
Perhaps NB means..... NOT Bronze
Alcohol displaces the water very well. Then dry with a hair drier. Works well. I use an old bread box with a hole cut in the top for the drier
No JB weld or Solder. Close the hole down from both sides, with a ball bearing and then re-stake the wheel in place.
Got a guy out here that does that to plates but much deeper. I guess he heard that the bushings need to be cupped. But he does it on the wrong...
I think a person should really learn to crawl before considering to run. Master crawling,,,,,,,,, then standing on your own 2 feet. Then running...
Why didn't you drill and replace the whole pivot. Why the extension<<< I don't get it ??
Take a broom stick and cut a slot in it. Insert the key and secure the key to the stick. You can rap wire or use a hose clamp. Home made let down
Looks sweet 1956 would be 62 years ago
This post has been looked at many times Therefore there is an interest. Some have a positive interest and some with not so positive. If you have...
If in fact this were true I just might believe it.
I have done this more than once this is not my first rodeo. I have been repairing clocks for...
Well Haven't heard anything from the customer, So the repair is a success and without a hitch.
You can pull the spring out by hand. And replace it by hand. Some frown on this, but it can be done.
You'll need to get the spring out of the clock and mic. the thickness, width, and measure the length. Then order from TimeSavers in AZ
Are you charging money for this work