Re: Screw-in (or up) bushings?
Are you certain about that? I have a Quad in a customers clock at the moment. On "gong" it sounds the full count on the hour but there is no strike sound on the half hour.
"Any other suggestions?"
Yes. Bring the clock to someone that knows what they are doing. Or put it away until you can learn basic clock repair on another, simpler clocks.
You have seen what a mainspring can do to your fingers. Just imagine if this happens when the springs are at full wind...
Not necessarily. I've known many clock owners that want their clock to look "nice" and run well. They could care less about originality or potential market value. Substitute parts, rathbun bushings, globs of solder, screw in bushings, it's ok with them. No convincing them of the errors...
Try Historic Timekeepers or DEOX-007.
Little or no odor.
Ventilation anyways. Not all chemicals that do harm have an odor. (Carbon monoxide comes to mind.)
As for the health issues, I would think that the amount of ammonia exposure needed to cause COPD over a period of years would be very...
Certainly not s.v. if the clock stops with the weights all the way up but runs all the way down when past 1/3.
Have you tried swapping the weights, not that I can see any difference there, unless one is bigger in diameter than the other and it is rubbing somewhere in the upper case.
Tell them it's a fire hazard. If their house catches fire and they bring in a dog to sniff for anything flammable they could face arson charges. (Far fetched, but if they believe the kerosene works they should believe that one.)
Has any of the members considered that the clock may not be set-up properly? When one of my customers has a problem with a clock that has run in my shop for weeks, it's usually a set-up problem or they have been walking around the house with the bob in the clock.
Looking at the photos, the...
I will echo Willie's very wise advice.
Do you have any experience repairing clocks?
A ships bell clock with a hairspring can be a challenge to a well experienced repairman.
Your clock is running now. Leave it as is, and enjoy it. In the meantime, you can study up on clock repair or have it...
This is something that I never gave much thought. I just did what it took to get the clock to strike the correct hour. Not all work the same.
I dont think this 11-9 or whatever, is a hard and fast rule with all makers.
I just came from my workshop and tried three different clocks. One will go...
Glad that you understood my "cryptic" reply. I wonder how many others did as well.
As you say, if there is a problem, changing the position of the hand will only work until the problem happens again.
That is, unless the hands were not positioned properly in the first place. In...
Windex never worked for me on GLASS either. There are all kinds of Windex variations today that might work better. But I just as soon keep it away from dials.
Just to be absoluely certain I just went to my workshop an took out a spare ST dial as you had shown.
I used warm water and...
You are a difficult person to argue with, however I have washed with soap and water dozens if not more of the ST dials that you show.
One of the few dials that I feel comfortable cleaning.
Maybe you had one that had been "retouched" in ink? I have seen that before.
I cant imagine...