Separate names with a comma.
MY Peerless No 2 with matching serial numbers 1824.
Another Peerless 2 lathe, serial number 25782.
Picture of Peerless No 2 lathe:
I have several Peerless No 2 Lathes that use the longer Mosley collets. Does anyone know when Marshall began manufacturing the No 2 lathe? Is...
Would anyone have information about a Boley lathe #19468? Thanks
Can anyone identify this tail stock? Its marked "PAT'D OCT, 12, 1909" and on the underside marked "531". Thanks
[ATTACH]Movement installed in holder...Thanks for the information.
Tried putting a 12size pocket watch dial in this tool, and it did not fit well. Seems like there was a company "Hardinge Bros, Chicago"...
The tool is approx 2.875 inches in dia, and the posts are .75 inches high.
Would anyone know what the name of this tool is and how it is used?
This L & R cleaner basket looks a little dirty to be used in cleaning pocket watch parts. Any suggestions on how to get it bright & clean?
The Mosely short collet is 1.360" long, and the Moseley long collet is 1.562" long, to me it appears that the collet locating pin could...
The serial numbers on my Peerless 2 lathe are: Headstock SN1324 - Bed SN 1324.
Was there a advantage in the Moseley long collets? Why did Moseley use the long collets?
I read that Late-model Peerless lathes were stamped "Peerless 2" - the 2 signifying that the lathe had been adapted to accept the longer collets...
Thanks to all - on my working lathe for safety I decided to replace the two wire cord with a three wire cord to the motor, connect a ground wire...
or this type of T connector for a 3-wire cord, I am currently just using open connectors for the splice to the foot speed control.
[ATTACH]I am looking for this type of connector's - AC main power wires with branch to foot speed control.
Would anyone have a suggestion were I might find a T connector for use in rewiring a Watchmakers Lathe Motor? Thanks
I also have a K&D staking set on the round wooden base (5 1/4 inch dia) and have found domes that fit, but have never found a dome with a lifting...