Search results

  1. malloy1

    Gents Pul-syn-etic Edward Glasgow Ship Clock

    I did find another marine clock on the net with the Edward of Glasgow name with the same dimensions and look (below), not with the "pul-syn-etic" movement. I took a couple of photos of the movement on my clock (below). The inspection date of "15-9-25" with the initials "SJ" or "ST" on the...
  2. malloy1

    Gents Pul-syn-etic Edward Glasgow Ship Clock

    Thanks-So the movement is made by Gents of Leicester and the case is made by Edward of Glasgow. Paul
  3. malloy1

    Gents Pul-syn-etic Edward Glasgow Ship Clock

    Just picked up this slave clock, and was wondering if anybody can help me locate the ship it came off? It's a brass Gents marine clock marked on the face as "Edward Glasgow - Pul-syn-etic", and the movement is marked as being inspected on 9-15-25. I assume that the clock was made for a ship...
  4. Gents EG3.jpg

    Gents EG3.jpg

    Gents EG3
  5. Gents EG2.jpg

    Gents EG2.jpg

    Gents EG2
  6. Gents EG1.jpg

    Gents EG1.jpg

    Gents EG1
  7. Gents Edward Glasgow

    Gents Edward Glasgow

  8. malloy1

    ATO Leon Hatot clock - Bad Coil or Magnet?

    Got it to run down to 4.5 V. Will not run on 3.0V yet. Peter, I checked the clock with your list. 1. The resistance is 2.7K ohms as I slowly ran the pendulum through it's swing. 2. Taking the copper ring off didn't do anything. 3. Didn't move the magnet, but I did tilt the movement...
  9. malloy1

    ATO Leon Hatot clock - Bad Coil or Magnet?

    I think I tried everything suggested so far, except re-zapping the magnet. The magnet is set so the south pole is the end that goes through the coil. I did flip it around, and the clock didn't work. I flipped the battery leads around, and the clock didn't work. I added rare earth magnet...
  10. malloy1

    ATO Leon Hatot clock - Bad Coil or Magnet?

    I do get the coil to move the compass needle a little bit with 1.5V applied to it (with the magnet removed). LED test light is 1.5V LED bulb with some lead wires. I'm observing the contacts of the clock. Battery is hooked up to run the clock. + end of of the LED is hooked up to the + side...
  11. malloy1

    ATO Leon Hatot clock - Bad Coil or Magnet?

    Ok - Got the clock running on a 9V battery - pendulum swings pretty fast. Runs on 6V. I'm happy that it's running, but need to get it to run on 1.5V now. Tried 3V, 4.5V doesn't run. I checked the magnet using the one I used to check my Bulle magnet (using a compass, what distance the...
  12. malloy1

    ATO Leon Hatot clock - Bad Coil or Magnet?

    I hope somebody here knows these clocks. Pretty sure it's from the 1920's, Serial Number 49441 - Leon Hatot clock movement Clock doesn't work. Made a LED test light, and when pendulum swings, I get a pulse (very constant) at the coil. Seems like 1.5V and a ground signal is getting to the...
  13. malloy1

    Dating ATO clocks

    Pretty sure it's from the 1920's, Serial Number 49441 - Leon Hatot clock movement - Clockette model. Can anyone date it? Need to look at it to see if it's in running condition. Hopefully, somebody here can help out if there's a problem. Paul
  14. Clocks

    Clocks

  15. malloy1

    Magneta shelf clock origin?

    Not sure why the photo didn't upload. Same style dials as yours. Did you ever get it running?
  16. magneta sm1.jpg

    magneta sm1.jpg

    magneta sm1
  17. malloy1

    Magneta shelf clock origin?

    It's also an alternating pulse. So if you are using a 1.5v battery, you would need to switch the wires so it gets -/+ one pulse, than +/- the next.
  18. malloy1

    Magneta shelf clock origin?

    That is a Martin-Fischer Magneta (Swiss) slave clock. Your right with the voltage (1.5V) and one pulse per minute. Nice Clock. I have 5 (4 wall and 1 shelf) of them in various sizes. The last one is not mine, but one that was in the lobby of the Singer Building in NYC. xyzzytom_200785...
  19. malloy1

    Bulle Post Your Bulle-Clocks Here

    Re: Adjustments, Adjustments, Adjustments.. It's running on time now. Thanks- Paul
  20. malloy1

    Bulle Post Your Bulle-Clocks Here

    Re: Adjustments, Adjustments, Adjustments.. Thanks John- I think I have it close. Maybe a little slow, but ok. The thumb screw is pretty high, but seems to be running on time. Need some more time to see. Paul
Our 2021 National Meeting in Hampton Roads Virginia
Topic related ad experiment