Hi Kevin W,
The manual will be 11 single sided US 'Letter' sized pages as a full size scan. Reducing the page size may not be advisable as the diagrams may become difficult to read.
Suggest, Google for a PDF copy of AWI's Horological Times of September 1978. This has a 3 page product...
The thick white wire, blue electrolytic capacitor, black diode on the blue cap, and wires attached to the blue cap are an untidy modification to replace the original, green 'tin box' capacitor, shown in your pic. The original wiring of the transmitter to the slave should appear as in...
Looking for an accurate scan of a Gent C7 transmitter Beat Plate to fab. a replica from, if possible. Original 'plastic' plate is badly damaged and illegible.
Any assistance would be greatly appreciated,
Hi Willie X,
Many thanks' for the response, much appreciated.
Unfortunately, there where no springs with the Movement to work from. I recall that what is usually found in the USA movements on the strike side is: 0.45mm x 17mm x the length needed as calculated. I would think the 0.45mm / 18...
Hi All, Could anyone please advise what the original dimensions were for the mainsprings fitted to these movements in the Going and Strike trains at the time of manufacture ? The movement is marked as follows:
"Crossed arrows", ie 'HAC', bottom left hand side of rear plate.
Does anyone please have a catalog or other pic/s of an HAC Wall Clock (Regulator type) No 956 ? This number is on a label pasted onto the back of the Clock. The Clock has a Werk 36 Movement, no numbers at all on the back plate.
Looking for pics to help reassemble a broken case and get an...