Separate names with a comma.
Glad to hear you resolved the issue!
Might glue it with crazy glue. If this positions it where you need it, then you can rivet it. if not you can drop it in some acetone which will...
Easy there Graham.
Are you saying there are no price gougers on your side of the pond??
Another thought just entered my mind.
Was the 1954 Pontiac positive ground, or negative ground?
I bought mine from Timesavers. Ebay also has a large variety.
Search "ultrasonic basket"
Is the car 6 volt, or 12 volt.
I believe these cars were originally 6 volt. As such the clock would be designed for 6 volt.
Many of these cars...
You can Shellac it. Then knock down the glossy sheen with 0000 steel wool followed by paste wax. I use Minwax.
Avoid Briwax as is destroys fresh...
Cutting Reamers for Busing Placement can only be lightly touched-up once or twice. Anything more will result in an undersized hole.
Looks nice. But I would Shellac it or atleast wax it to keep dust from impregnating the pores of the wood.
You sharpen a reamer with a sharpening stone. Same as any other cutter
It looks like it needs to spread open.
Maybe a Clock Plate Spreader, or Internal Snap Ring Pliers will work to give you a controlled spread.
The first two are likely someone's work-around.
The hole in the minute shaft probably held a pin to tighten floppy hands against.
The hole in the...
Could get Feather Pens with Nibs.
Dust the movement with one end, Oil it with the other.
A Win Win
Many of the Youtube Machinists use a articulated dial indicator base to hold their camera's.
Similar to this.
HFS Magnetic Base Holder For...
Thanks, I have them in my shopping cart. Now I just need to wait till Monday for shipping, then wait for UPS or the Post Office. I'd much rather...
Thanks, I'll check them out again. I was looking for a complete governor on their site. It hadn't occurred to me that replacement gears might be...
If you can't find a replacement, I think I would remove the plastic gear so that it can be closed up. Then turn a thin flanged part with a collar...
I have a Animated Cuckoo Clock in for repair that won't run.
Other than the Movement being filthy I found the Governor drive gear is cracked....
If they're steel pins you can stick a small button magnet on the side of your tweezers.
High quality German made Hemostats, Tweezers, & other...