Search results

  1. M. Frank

    Mystery clock, knife edge suspension, pin wheel escapement, Huguenin a Paris

    Yes, the movement itself is 13", dial 4". One thing to look for in copies, and this was mentioned earlier is the rolled brass. All pre-1890 or so skeleton clock frames were made from casting of either the frame design or a cast/hammered brass sheet. These inevitably has some tiny and sometimes...
  2. M. Frank

    Mystery clock, knife edge suspension, pin wheel escapement, Huguenin a Paris

    I have recently purchased a clock nearly identical to the one you describe, however it is the original upon which all those Chinese copies are based. Hopefully other folks will refer to this web page to check for the differences. The first thing to look for is the difference in the hands and...
  3. M. Frank

    Has anyone seen this type of Seth Thomas movement?

    You are right, Time locks and alarm timers were marketed to the people who had valuables to safeguard. I have added a page with more views of the movements as well as the time lock here: Seth Thomas
  4. M. Frank

    Has anyone seen this type of Seth Thomas movement?

    Pictured is what I believe to be a bank alarm timer, may be an experimental or prototype. It has a pair of what look to be high quality jeweled Seth Thomas movements. Damascened plates, dust cover and dual springs. Have these movements been used in other applications? I know that there are other...
  5. M. Frank

    Astronomical skeleton clock

    Last month I went to Australia to visit the firm of Buchanan where the commission for an astronomical skeleton clock has been placed and design and construction has been taking place for the past seven years. Many of you may have been following the progress on my website at...
  6. M. Frank

    Miniature tower clocks

    I thought some folks might be interested in seeing a couple of tower clocks that are mounted in tall cases for domestic use. these three train tower clocks are a little over one foot wide. You can get full descriptions and more photos here: http://www.my-time-machines.net/german_mini_detail.htm...
  7. M. Frank

    Here's my Telechron Type E vacuum glass master clock

    Check the website link it explains it. It's an interesting story. Suffuce to say it was in a junk store in hte middle of nowhere in the Appalacian mountains.
  8. M. Frank

    Telechron Type C master clock - anyone out there with one??

    I have recently obtained a Telechron Type C master clock, s/n 7, circa 1921. I am wondering if anyone else has seen or has one. Mine is missing the mercury switch tilt table and I'd like to get better photos for duplication than are available in the NAWCC Bulletin article August 1991: the only...
  9. M. Frank

    Here's my Telechron Type E vacuum glass master clock

    I've finished restoring a very rare telechron Type E master clock. To my knowledge there are only two or three around. A full discussion is here: http://www.my-time-machines.net/telechron_type_e_detail.htm .
  10. M. Frank

    Clock Kinetic Sculpture

    John, Thanks for the vote of confindence. This is exactly what we were hoping to acheive. In January of this year I began to be concerned with the pillar and plate design that we had originally developed. The clock was developing nicely between the temporary plexiglas plates and I knew that no...
  11. M. Frank

    Clock Kinetic Sculpture

    As Tom correctly points out, this is a work in progress. For anyone who wants to see an explanation of the various complications, 21 at last count and a few like a tide dial have since been added), you can read the .pdf file at...
  12. M. Frank

    Jump Minute Tower Clock?

    While I cannot comment on the movie, or whether the movie did any tricks to get a minute jump, minute jumping tower clocks are not uncommon. They use a remontoire that has a one minute duration. Some used 30 seconds while others had 15 or even 10 to 5 seconds. One minute being most common for...
  13. M. Frank

    NAWCC Bulletin Vol. #11

    Does anyone have a bound version of the NAWCC Bulletin volume #11 covering #107-118, 1963-65 for sale? Mark
  14. M. Frank

    NAWCC Bulletin Vol. #11

    Does anyone have a bound version of the NAWCC Bulletin volume #11 covering #107-118, 1963-65 for sale? Mark
  15. M. Frank

    The day I've been dreading!

    I was approached by owners of a former factory building (since converted to condominiums)here in Chicago about modernizing their clock tower. In this case the entire motion works were broken and the hands seized. The price of repair was more than the price to put in seperate motors behind the...
  16. M. Frank

    The day I've been dreading!

    With regards to tower clocks in Canada, there is a new book out on tower clocks called Towers of Time, Ontarioby Marc Boileau. Vanwell Publishing Ltd. You can order it from the publisher. Mark
  17. M. Frank

    What you missed at the MW Regional..........

    I have posted on the web a brief description of the astro-skeleton clock. You can view it here: http://www.my-time-machines.net/presentation_paper_7-28-06_web.pdf This will eventually be linked to my web site and information, photos etc. will be posted over the three year period of time that it...
  18. M. Frank

    St. Paul's Cathedral Skeleton

    Richard, You've seen some of my skeletons on my web site, but for those others who have not you can use this link: http://www.my-time-machines.net/my_skeleton_clock_collection1.htm this is page one, there are three others that follow. In case you like to see other clocks with exposed...
  19. M. Frank

    Post Your Clock Collection Here

    Georgio, email me at mfrank1@rcn.com Mark
  20. M. Frank

    Post Your Clock Collection Here

    OK, Check out my web site. It's divided into 5 parts. Tower clocks, Tower Clock Restoration, Skeleton Clocks, Bank Vault Timers, Other. Note that most pictures link to more detailed photos. http://www.my-time-machines.net Mark
Our 2021 National Meeting in Hampton Roads Virginia
Topic related ad experiment
Know Your NAWCC Forums Rules!
RULES & GUIDELINES

Find member

Forum statistics

Threads
160,942
Messages
1,396,192
Members
82,924
Latest member
waynebernelli
Encyclopedia Pages
1,099
Total wiki contributions
2,788
Last edit
How to wire a 24 volt secondary for a 12 volt ITR/IBM Master clock system by Toughtool