Separate names with a comma.
Hi Dr.Jon ,
Just for the pleasure of talking! (...and do not forget the first part of my signature block, I have just a basic knowledge of your...
If you watch the second picture you can see that the b8 tool has the disks which are converging and I guess that no material is allowed...
Thanks for your time in replying.
Has someone a clue on the use of this tools?
One has a B8 collet and the other one a W12 collet.
Hi Allan, thank you for tour kind words and for your mail with the attached article.
I have just finished to build my last project: a replica of the Raingo orrery and I named it Raingo-Croce ( my family name) for my...
Thank you very much for your interest in my research.
I'll try to get in touch with them.
All the best.
As someone a clue on how are made the missing parts of this mouvement in the place shown by the 2 arrows?
The clock should...
Thank you for your kind words
My apologies, but I do not understand. The use of a remontoire in a "clock" is not a "need" but an addition to try...
The aim of this project was just to show to some fellows of mine how to build a clock with items recycled by an old clock.
This was the...
Thanks for the information...so no hope to get in any way some pictures :(
Hi tok tokkie,
thank you very much for your interest in my posting.
The description made by Royer-Collard (F. B.) in his excellent book...
incidentally...this is the clock
Al the best.
I'm looking for some information on the clock "Pendule de Compagnie" built by Hubert Sarton and which has a dial pivoted on an axle and...
Tomorrow I'll leave for a one week vacation. As soon back home I'll take a picture of the back plate of the movement.
Just joking! Just joking! In this case I should see on the plate of the movement an evidence of the bell support :)....
I guess the pins are too...
It is the first time that it happens to me to see a count wheel of a French movement fitted with very small pins.
To be sincere I didn't see these...
Reading this thread I have found no data on this pinion. They might be useful to better understand the problem.
Module? Outside diameter? Number...
thanks to leeinv66 too for his posting.
This board looks like to be a gold mine of information... :bigsmile: