Search results

  1. K

    Dividing Head for Mill

    I made the mistake of visiting Jerry at his home in Wisconsin.............next day I ordered the Sherline CNC Rotary table.:) What a great tool! I'm building WR Smiths Skeleton clock and I used it to cut all the gear teeth and cross out the wheels. I thought it was worth the investment...
  2. K

    Seth Thomas 8-Day Column & Cornice

    This is what I have in mine. This was in teardown before cleaning. It's a Seth Thomas. Hope this helps. Kim
  3. K

    Clockmakers Brass

    I bought some 3/16" 353 1/2 hard from Sequoia Brass and Copper. They have a website. I used it for the plates on WR Smith Skeleton Clock.
  4. K

    Seth Thomas 86 40 Tooth Escape Wheel Dimensions

    Mike, I just made a new anchor for an 86AF, and the escape wheel measured 1.840" OD and had 64 teeth. Not sure if this helps. Kim
  5. K

    Broken drill

    Jeff, I may be able to help you with this. Check you PM. Kim
  6. K

    Cuckoo Clock Minute Hand

    I thought a nut goes on first, but just far enough for the minute hand to catch the square, then the minute hand, then the washer, then the outer nut. The original picture from the OP shows the correct arrangement, but the inside nut probably has to be unscrewed a bit so it doesn't lock up the...
  7. K

    Morbier Bell

    I'm looking for a bell for a Morbier Clock. Thanks. Kim
  8. K

    Basic Lathe Procedures

    Thanks for sharing Jerry. I always enjoy reading your informative posts.
  9. K

    Bent gear tooth... Is it always necessary to replace?

    Use the search function and look up "Planishing". Lots of information there. Kim
  10. K

    cases for orphan movements

    Very nice! Where do you get your movements? Kim Miller
  11. K

    Seth Thomas Electric Motor

    I'm looking for a replacement motor for a Seth Thomas A502-001 General Time Corp., or someone that can rebuild. It was working, but when I removed the movement the insulating material between the coil disintegrated. Or is this something I can rebuild myself? Thanks for any help. Kim Miller
  12. K

    English Tall Case Movement & Dial

    That's what I'll do then. I'm going to have to do some disassembly, because someone else tried to re-glue several areas and did a lousy job. There is a bottom. Some worm holes in the back but the rest of the case is ok. I'll post progress in the case restoration section. Thanks for the advice! Kim
  13. K

    English Tall Case Movement & Dial

    Thanks for the information. Kim
  14. K

    English Tall Case Movement & Dial

    Here are some case pictures.
  15. K

    English Tall Case Movement & Dial

    Yes, I'll add some pictures of the case later this afternoon. Thank You!
  16. K

    English Tall Case Movement & Dial

    I'm looking for some information on this English tall case movement and dial. Some information that I found with the clock dates back to 1823. But other research indicates late 1700's. Anybody know which would be the correct time period? The Dial says Tho. Leadbeater, Sandbach. The case it came...
  17. K

    J.G.L. Movement

    Thanks Steven. Very well built. Thick heavy plates. Kim
  18. K

    J.G.L. Movement

    Just took this movement in for repair. Who is the maker and what is the age? Never had one of these yet. Looks well built. Thanks. Kim Kim
  19. K

    Seth Thomas Medbury 6E

    Anyone know a fix for a Seth Thomas Medbury 6E model E720-001 with a A502-000 motor. Can't find motors anymore. Is there another option? Thanks, Kim Miller
  20. K

    Quartz Movement Help

    Thanks for the help! I'll have to see if I can make it fit in the case. Kim

Forum statistics

Threads
165,505
Messages
1,440,734
Members
86,272
Latest member
Lkleinow
Encyclopedia Pages
1,101
Total wiki contributions
2,873
Last edit
Weekly News 7/7/19 by Tom McIntyre