Separate names with a comma.
Thanks for the input.
I assumed, newbie thinking, that I could move the hour hand as with other clocks.
Well, I removed the dial, pendulum, hour...
I tried to set the clock on time but I am unable to move the hour hand.
As you can see in the photo the hour hand is off.
The minute hand is off...
The 124 movement was made from 1924 to 1956.
I was hoping some one could date it by the style of the cabinet.
Hopefully others will chime in.
I took a long and close look at the suspension spring and it appears to be OK.
I played around with the pendulum and after a long period of trial...
Thanks to both.
I did shim the bottom of the case and now the pendulum is better centered in the slot. There is no rubbing at all.
I need more help!
As soon as I put the clock on the wall it started ticking away.
I hooked the pendulum and only runs for less than a minute. I...
I need help to date this clock.
Is there a name for this style cabinet?
The base for the chime rods says "MAYLAND"
It measures about...
Thanks for your comments!
I was wondering if the plates and other parts that are prone to oxidize should be protected with a very very light oil...
Thank you for your help.
It cleaned up very nicely.
I hope this photo helps.
I'm starting to take apart this clock to clean and oil.
How can I remove the top plate, and all the wheels?
Only 4 top screws and the...
I would have never know the suspension adjustment was a replacement.
The Berlin has a threaded nut for the hands.
The Unique strikes on a gong. The plates are held by nuts.
There are actually two...
The clock with the black dial is 11" tall x 9.5" wide.
The clock with the white dial is about 9.25" tall and about 11.5" wide.
I'm glad to see you are back.
I've had two of the Ansonia black iron clocks for a few years now.
Unfortunately the aesthetics on the...
Thank you all for chiming in!
This bell accidentally hit the floor and broke into 6 pieces.
I could make the pieces fit back, as they were clean breaks.
How can I best put all...
Here I'm attaching more photos of the weights and of the movement.
I can't tell if the dial is factory painted or enameled. The numbers on the...
Thanks for the replies.
I have no access to the movement.