• Upcoming updates
    Over the next couple of weeks we will be performing software updates on the forum. These will be completed in small steps as we upgrade individual software addons. You might occasionally see a maintenance message that will last a few minutes at most.

    If we anticipate an update will take more than a few minutes, we'll put up a notice with estimated time.

    Thank you!

Search results

Sidebar
  1. claussclocks

    Seth Thomas Regulator #20

    I have a Seth Thomas Regulator #20 in for repair. The suspension spring is missing. It uses a movement model #68. Does anyone know what suspension spring would work. I have a Jewelers regulator spring 1 1/2" long x 0.15mm thick and a Seth Thomas #2 1 1/4"log by .004. Any preference from...
  2. claussclocks

    Looking to help someone in Jackson TN

    I cleaned and repaired a Seth Thomas#2 for a customer who moved from Texas to Jackson Tennessee area. In the move something minor seems to have happened. I don't know if the cable is fouled or something slipped. He has checked for crossed hands, so thats not it. Anyone know someone who does...
  3. claussclocks

    Picked up at a sale any idea on maker and date

    Sure looks like it. Do you have any idea of when it was made and what the suspension spring thickness is.
  4. claussclocks

    Picked up at a sale any idea on maker and date

    As stated above the same number is on the bottom of the pendulum.
  5. claussclocks

    Picked up at a sale any idea on maker and date

    Thanks for the update. I was going by the photos and associated names as you may have guessed. I haven't done anything with it yet but I'm sure I will have to check that suspension. Thanks DPC
  6. claussclocks

    Picked up at a sale any idea on maker and date

    I found this languishing at an estate sale and decided to bring it home. Appears to be of older design but it has no trademark anywhere on it. The number 77725 on the lower corner of the back plate and on the bottom of the pendulum are its only markings. The dial resmbles a Phillip Haas if you...
  7. claussclocks

    Need Weight Advice

    ThankYou. I will try that and keep this trick for down the road. DPC
  8. claussclocks

    Need Weight Advice

    This is a customer's clock. It's anEnglish Pub clock. Hard to tell from photo due to lack of reference points but it is over 5 ft tall. In shipping from England the weight and winder were lost. The winder is not a problem but does anyone have a feel for what size weight would be good. This...
  9. claussclocks

    Makers mark

    Thank You. I thought it might be DPC
  10. claussclocks

    Tip for replacing the hammer leather.

    This can also be used to harden overly soft leather a bit. Varathane makes the same product.
  11. claussclocks

    Makers mark

    Does anyone recognize this German mark? I know it's familiar but can't find it so far in my references. Sorry for image quality. This is the only one I have and no access to take a betters shot DPC
  12. claussclocks

    Russian Timepiece from Submarine(?)

    I worked on one recently that might have been the real thing. It was acquired by a gentleman who had been a field office agent for a U.S. newspaper in Russia, He got it while there in the 70's or early 80's. It looked different from the one pictured. It had a porthole type screw down cover...
  13. claussclocks

    Customer Tubular

    Unfortunately, no but in the earlier picture with his father standing beside it he is 6'1". It has to be almost 9' You and Jay need to run up to Oklahoma City and snag that one for your collection. :)
  14. claussclocks

    Customer Tubular

    I stopped by on my way back from Kansas and took more photos of this clock. The clock is at a deceased parents house and no one has a place to for it. They want to sell it but have no idea of current value. Looking for buyers. I don't have a place for such a big clock either. I looked for a...
  15. claussclocks

    Customer Tubular

    I am going to Kansas and will pass through OKC. If one of the family is available I will stop and get more details. None of the family has a place for such a large clock. They are wanting to sell it where it is in their parents home which will also be sold later as part of their estate. DPC
  16. claussclocks

    Customer Tubular

    A customer has asked me to find any information on this tubular he inherited from his parents The only markings he has found are on the dial "Barfoot Brother of Hove, Sussex. I believe this was a jewelry store. They probably sold the clock.. The clock is currently in Oklahoma City so I...
  17. claussclocks

    Customer has an Illinois Bunn Special

    I appreciate the input from everyone. This watch is a family hand down. The owner sent me three more photos that maybe useful in refining the information on the watch and its value but I appreciate everything sent so far. She says there is very little wear on the back and the white gold color...
  18. claussclocks

    Customer has an Illinois Bunn Special

    I'll see what I can find out from her. Thanks
  19. claussclocks

    Customer has an Illinois Bunn Special

    One of my customers has an Illinois Bunn Special. She wants to know if it unusual and does it have any particular value as a collectors piece. I don't have much watch experience so I can't help her. Anyone have any information that might help her out
  20. claussclocks

    New owner of the family fusee

    Beautiful clock. Welcome to the NAWCC forums DPC
Know Your NAWCC Forums Rules!
RULES & GUIDELINES

Find member

Latest posts

All Online

Total: 838 (members: 21, guests: 817)
Most visitors online was 4107 , on 14 Jan 2023

Forum statistics

Threads
180,006
Messages
1,570,196
Members
54,339
Latest member
christensenjewelry
Encyclopedia Pages
911
Total wiki contributions
3,090
Last edit
How To Open A Pocket Watch Case by Kent
Top Bottom