• Upcoming updates
    Over the next couple of weeks we will be performing software updates on the forum. These will be completed in small steps as we upgrade individual software addons. You might occasionally see a maintenance message that will last a few minutes at most.

    If we anticipate an update will take more than a few minutes, we'll put up a notice with estimated time.

    Thank you!

Search results

  1. K

    ESBO movement problem

    thank you very much
  2. K

    ESBO movement problem

    Hi again In this movement on the center shaft is tension spring (clutch) should I drop some oil on it or not ?.It is hard to move minute hand at this moment and clock run slow too
  3. K

    ESBO movement problem

    Yes of course just ESBO movement has different pallets
  4. K

    ESBO movement problem

    Movement works .I think the crutch was rusty in place where touching verge.I put it back in the cleaner for half a hour. Thank you very much for your help
  5. K

    ESBO movement problem

    Thank you for your comments .I have not seen anything unusual it is quit simple and easy mechanizm but was very dirty and I did use quit big pressure and could not moves at all. I will dissemble again and check it properly
  6. K

    ESBO movement problem

    Hi Anyone of you dial with ESBO movement which is in my Dutch Zaanse wall clock .I did clean and oil .The clock is not in a beat stop after 10 s Problem is there in not slip fit crutch I did try and does not moved. Am I raight ? if yes what can be another option to put in beat?
  7. K

    Zaanse -weights problem

    I am planning find something heavy and find correct weight and after that buy original weights
  8. K

    Zaanse -weights problem

    Thank you Duck .It is very helpful for me .The movement looks ok I don't think there is any problem .I notice people selling that kind clocks without the weights because selling them separately for better money .Brass is quite expensive this days .I will try 2.6 lb thank you
  9. K

    Zaanse -weights problem

    Hi How important is the weight of weights for dutch Zaanse clocks?.I bought clock without weights and I found out that weights are between 800 to 1600g .My mechanizm is Franz Hermle --31cm 125.780 -- 261-080A .
  10. K

    Dutch Atlas wall clock for restoration - "Nu Elck Syn Sin"

    Thank you very much for the link
  11. K

    Dutch Atlas wall clock for restoration - "Nu Elck Syn Sin"

    Thank you JTD any guess what can be the weight?
  12. K

    Dutch Atlas wall clock for restoration - "Nu Elck Syn Sin"

    Hi I bought it on eBay for restoration project without pendulum. Can you help me to find out what weight and length could be for that mechanizm "Franz Hermle --31cm 125.780 -- 261-080A please.
  13. K

    Patent number 421434

    Thank you Graham I thought is more than that
  14. K

    Patent number 421434

    Hi Can you tell me what that part does do and how regulate it please thanks Tom
  15. K

    Chime problem

    Thank you all for advice .I will check chime train separately and let you know.
  16. K

    Chime problem

    Hi Yes I removed springs and cleaned them. Yes I did read that article. I am beginner with the clocks but in my opinion clock does not need busing I agree that distance looks like is incorrect but how you can explain that the second movement which I have has the same distance and also I found...
  17. K

    Chime problem

    Hi Thank you very much for your interest.I did clean mechanism and springs.The springs were not in bad condition I just cleaned it and put some oil.I have not knowledge to tell you is chime spring still good or not .I do not know how can I check it.You can see dust on the clock this is becouse...
  18. K

    Chime autocorrect problem

    Hi I fixed the problem with autocorrect thank you for help
  19. K

    Chime problem

    Hi Can you please look on the video and tell me how I can fix problem with the noise .Looks like hammers have no power to lift even when spring is fully wound. Hammers pins slide over the barrel pins and make that noise. Is that because spring is too weak ?I did not touch pins on the chime...
  20. K

    Chime autocorrect problem

    I should have my book tomorrow thank you for that Mike

Forum statistics

Threads
178,848
Messages
1,568,652
Members
54,000
Latest member
stademock
Encyclopedia Pages
909
Total wiki contributions
3,078
Last edit
E. Howard & Co. by Steven Thornberry