Separate names with a comma.
The bores depend on the diameter of the pendulum rod. I have on my watch a diameter of 12mm for the pendulum rod and 14mm for the...
Hello friends of the clock making
The last two weeks I spent with the preparation of the escapement. For this I had a model made of 2mm brass...
after a long time I'll be report back to. I have changed the place of residence during the period of absence, was ill for longer and...
Unfortunately, I did not come in the last two months very far with my pendulum clock. I'm going to change the place of residence and...
I processed today, the boards of some clock. So I can see the whole better, being only a Plexiglas was used as a second board. However,...
I have a long time to work on the next clock finally back. I finished the gravity drive.
The recesses were milled for the auxiliary...
I have built further back on the clock and fined the individual parts of the gravity drive something.
Since it's too cold in my basement,...
I just got back to some work on my precision pendulum clock. Here are some pictures.
here are some pictures for gravity drive.
I will write to him and ask Stephan send you his results. I can not ship without his OK. I hope you have this understanding.
Today I continued to work on the engraved pawls
Order to reduce the contact surface and thus the friction, the pawls on both sides is...
the machined with oversize wheels are fixed with very stable holding mandrel and bolted.
The mandrel is used in...
Today I want to show you how I made my wheels.
a thornton-milling cutters was used.
as the first part, we...
here are some pictures of my workshop at home
The milling machine is rebuilt a BF 20 of optimum, on ball screws
Yes right, i learned at many years ago the job of a mechanic. For a long time, I work in a different job.
This clock is my first clock that...
Hello Jim Du Bois,
I've also had no experience with the ball bearings. But few people know that they have installed with success in their...
Hello Tok Tokkie,
I want to use the DLC coating because the process temperatures are relatively low, only 200 ° C. The layer thickness 2-3/1000mm....
Hello tok tokkie,
No, the ball bearing, I have integrated, because I want do without lubrication. That's why I put a ball bearing ceramic on all...
my name is Dieter I am 50 years old and I live in Middle Franconia in Germany. I am passionate about second clocks. Since I am still...