Recent content by teslak

  1. T

    Riefler Pendulum Bob turning

    Hello, dandy, The bores depend on the diameter of the pendulum rod. I have on my watch a diameter of 12mm for the pendulum rod and 14mm for the compensation sleeves. The smaller hole goes up to the middle of the pendulum lens, important is a straight or right-angled support for the compensation...
  2. T

    build a pendulum clock

    Hello friends of the clock making The last two weeks I spent with the preparation of the escapement. For this I had a model made of 2mm brass scale 4 first: 1 Saw. To facilitate my work, I have drawn the anchor in CAD, enlarged to the corresponding dimension and printed on the printer. The...
  3. T

    build a pendulum clock

    Hi there, after a long time I'll be report back to. I have changed the place of residence during the period of absence, was ill for longer and have the need to set up workshop again. But now it's finally back on with the construction of the clock. Here are some pictures from the new workshop...
  4. T

    build a pendulum clock

    Hi there, Unfortunately, I did not come in the last two months very far with my pendulum clock. I'm going to change the place of residence and therefore had to do a lot of other things. Once the move is complete and I can work in the workshop again, I like writing as the clock continues going...
  5. T

    build a pendulum clock

    Hallo all, I processed today, the boards of some clock. So I can see the whole better, being only a Plexiglas was used as a second board. However, this is later replaced with a 6mm thick brass plate. Best regards, Dieter
  6. T

    build a pendulum clock

    Hallo all, I have a long time to work on the next clock finally back. I finished the gravity drive. The recesses were milled for the auxiliary drive of the elevator in the roller wheel. Next, the pins had to be rotated and pressed to the auxiliary drive. After cleaning everything...
  7. T

    build a pendulum clock

    Hi all, I have built further back on the clock and fined the individual parts of the gravity drive something. Since it's too cold in my basement, I went into my study. To protect the furniture I've edited a simple board. Here are some pictures. Best regards, Dieter
  8. T

    build a pendulum clock

    Hi all, I just got back to some work on my precision pendulum clock. Here are some pictures. Dieter
  9. T

    build a pendulum clock

    Hello, here are some pictures for gravity drive. regards, Dieter
  10. T

    build a pendulum clock

    Hi Jim, I will write to him and ask Stephan send you his results. I can not ship without his OK. I hope you have this understanding. regards, Dieter
  11. T

    build a pendulum clock

    Hi all, Today I continued to work on the engraved pawls Order to reduce the contact surface and thus the friction, the pawls on both sides is turned back to a diameter. order to facilitate the running of brass bush 58 has been rotated. The large diameter is 3mm, the small 2mm and a...
  12. T

    build a pendulum clock

    Hello, the machined with oversize wheels are fixed with very stable holding mandrel and bolted. The mandrel is used in the rotating machine aligned with concentric and the outer diameter of the blank is rotated to measure. the shape, tooth cutters we set to center round...
  13. T

    build a pendulum clock

    Hallo, Today I want to show you how I made my wheels. a thornton-milling cutters was used. as the first part, we installed the Rotary Table and aligned to the center of the spindle the stencil is mounted on the template table it is worked out with the template...
  14. T

    build a pendulum clock

    Hello here are some pictures of my workshop at home The milling machine is rebuilt a BF 20 of optimum, on ball screws The lathe is from the same manufacturer the small lathe is a lorch-replica my main machine, a Lienhard engraving machine best regards, Dieter
  15. T

    build a pendulum clock

    Hallo Yes right, i learned at many years ago the job of a mechanic. For a long time, I work in a different job. This clock is my first clock that I design and build. I work since two years to the clock and have many parts two or three times produced because they are not managed well. It is not...
Our 2021 National Meeting in Hampton Roads Virginia
Topic related ad experiment
Know Your NAWCC Forums Rules!
RULES & GUIDELINES

Find member

Forum statistics

Threads
160,940
Messages
1,396,176
Members
82,923
Latest member
tcbarnard70
Encyclopedia Pages
1,099
Total wiki contributions
2,788
Last edit
How to wire a 24 volt secondary for a 12 volt ITR/IBM Master clock system by Toughtool