Most visitors online was 4107 , on 14 Jan 2023
-
-
Rob M replied to the thread Options For Water Removal Bath.Sorry - still no info in your initial post but now I understand. You appear to agree that alcohol is the bath to use after a water... -
Rob M replied to the thread 1920 Gilbert Mantel Clock.Pictures of 3 adjustable bobs. 2 will work on this clock the 3rd is just an example of the type. Again, how off is the time please.
-
-
Rob M replied to the thread Options For Water Removal Bath.Sorry - your initial post shows as just a big "a" and arrow symbol (failed amazon link?) with no narrative at all in your post. Can you...
-
Rob M replied to the thread Interesting Gong.Not sure I fully understand your questions. Per the picture the gong is inside a kitchen clock, correct? Why would you need video to...
-
Rob M replied to the thread 1920 Gilbert Mantel Clock.There are some bobs that allow you to adjust the length on the bob itself. How far off is the time?
-
Ive been of the opinion that rubbing alcohol (91% is the best I can easily find) is a good bath to remove water from a cleaned clock's...
-
Rob M replied to the thread How Can I Reduce Fire Hazard.Thanks Gmorse and Bruce - I will get the fire blanket and try not to worry so much.
-
Rob M replied to the thread How Can I Reduce Fire Hazard.No smoking but yes the occasional soldering with torch and soldering iron. Since the alchol is flamable and the cleaner's flameability...
-
I currently use 91% rubbing alcohol as a water removal rinse, then dry using an old hair dryer. I also use a cleaner (photo attached)...
-
-
Rob M replied to the thread Request for advice about using my new ultrasonic tank.Not looking to hijack the thread but I expected more controversy on the ammonia versus non-ammonia question. Nice to see both points...
-
Rob M replied to the thread Runs Without Verge But Not With.Yes. The adjustment was all that was needed. I have worked on a number of clocks but only once before adjusted a verge and it seemed...
-
Rob M replied to the thread Runs Without Verge But Not With.Thanks everyone - it ran all night!
-
Rob M replied to the thread Runs Without Verge But Not With.Thanks you guys for looking this over and giving me ideas. Here is a 30 second video. With a bob on the pendulum the escape wheel...
-
Rob M replied to the thread Runs Without Verge But Not With.Best I could do was a short video since any longer was too large a file for my email. It appears to "try" to run but only for a second. --
-
Found this old works without a case. India.... The escape wheel runs like crazy without the verge but zero with. I was going to...
-
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
Know Your NAWCC Forums Rules!
RULES & GUIDELINES
RULES & GUIDELINES
Staff online
-
Philip MorrisChair, Museum Collections
Forum statistics
- Threads
- 184,070
- Members
- 56,020
- Latest member
- audreydargie
- Encyclopedia Pages
- 918
- Total wiki contributions
- 3,195
- Last edit
- Waltham's Canadian Railway Movements by Kent