Recent content by MNSTREETGLIDE17

  1. M

    Era identification Sessions Beehive

    Thanks everyone, my guess was somewhere between 1910-1920. I hoped someone may have had a book or other materials that might help narrow it down.
  2. M

    Era identification Sessions Beehive

    Can someone assist with an approximate year on this Sessions clock? No dates stamped on the movement. It does have a Porcelain dial.
  3. M

    Korean Ansonia Clone?

    You could be on to something. No extra mounting holes but It only had 3 screws holding the movement in. The 4th hole in the upper left corner was marked but never used as you could not get access to install a screw. The movement was mounted as high as possible but the pendulum would touch the...
  4. M

    Korean Ansonia Clone?

    Exact match, bummer you have no background info on it.
  5. M

    Korean Ansonia Clone?

    That was my assumption also. Cousin told me he thought it was a Korean copy of a Japanese copy of an early American clock.
  6. M

    Korean Ansonia Clone?

    Correct, that is the riveted end of a post, one nut goes on the back.
  7. M

    Korean Ansonia Clone?

    Correct, I was implying a replica of an Ansonia movement.
  8. M

    Korean Ansonia Clone?

    Back of the clock is solid wood, not a pressed material.
  9. M

    Korean Ansonia Clone?

    Serviced this clock for my cousin. He purchased in south Korea in 1980 for his parents. Trying to find out more info about the maker and era it was produced. The plates are stamped steel and has a mix of brass and steel components. No makers mark anywhere. My Facebook group thought maybe Sam...
  10. M

    Bushing Selection Assistance Needed

    It helps to know what I may run into and why so I can plan ahead, thank you!!
  11. M

    Bushing Selection Assistance Needed

    On the outside diameter?
  12. M

    Bushing Selection Assistance Needed

    When you do have to do a bushing within a bushing, do you go as large as possible or only as small as needed?
  13. M

    Bushing Selection Assistance Needed

    Yes, already using my digital caliper.
  14. M

    Bushing Selection Assistance Needed

    I am aware of the two sources. I thought I should pick a brand for familiarity and consistency to start off, understanding I may need to adapt going forward based on the situation. I may be off a bit when trying to measure the existing bushing in the plate as I don't see a OD of 3.8mm in either...
  15. M

    Bushing Selection Assistance Needed

    Good suggestion to keep in mind, thank you.

Forum statistics

Threads
176,133
Messages
1,541,618
Members
53,147
Latest member
Nightshower
Encyclopedia Pages
1,065
Total wiki contributions
3,030
Last update
-