Recent content by kellycru5

  1. K

    Kundo Clock Help Needed

    Hello. Still running 26 hours later! These are the first 2 clocks I have ever worked on. I don't know how you guys do it. It must drive you crazy sometimes. Thanks for your help and I am sure something will go wrong sooner or later. It is fun though to check up on the forum
  2. K

    Kundo Clock Help Needed

    Wayne if you look back at #20 I have the washers aligned on the cannon pinion but have added a 3rd tension washer. It seems to be working!? I thought that without the second tension washer I could not get the minute hand tighter so that it did not slide for the 3 to the 6 by tapping on the...
  3. K

    Kundo Clock Help Needed

    Still running 2 hours later. Put second tension washer in, in this configuration. Hour hand,(, I, ), front of works case. The orientation of the washers are the parenthesis. ( =tension washer in this direction then, I is flat washer, then ) = tension washer in this direction.
  4. K

    Kundo Clock Help Needed

    Hey Rough. so I put the bent edge facing out against the flat washer (so the cup is facing inwards to the plate). The flat washer then is touching the hour hand. There seems to be a lot of play so maybe a second tension washer facing out against the flat washer?
  5. K

    Kundo Clock Help Needed

    Hi. Well tore the Kundo mini down. With hands it stops in 10 minutes. Hands off has been going now for 5 hours. Any suggestions on why the hands are causing it to stop? I'll try anything at this point. When the hands are on if I push the hour hand on all the way (with washers) in then...
  6. K

    Kundo Clock Help Needed

    Well took the hands off and still stopping in about 40 minutes. Guess I will tear down and start over. Thanks all
  7. K

    Kundo Clock Help Needed

    Removed the hands and face and started from scratch from the washer on pinion shaft out wards. I don't think I am getting enough and then too much friction between hands and washers. I am going to get 2-3000 grit pads to polish the brass on hands. I don't know how you guys do it going from...
  8. K

    Kundo Clock Help Needed

    After a week of running and keeping good time the Kundo mini just stopped. Everytime I start it it stops within 10 minutes. Did not touch anything! Any suggestions/
  9. K

    Kundo Clock Help Needed

    Working on it but I'll give a few days before I'll know for sure
  10. K

    Kundo Clock Help Needed

    Sorry that was a minute in 2 hour period.
  11. K

    Kundo Clock Help Needed

    So it has been 24 hours since I got the tension washer and the clock is humming along losing a little less than a minute a day. I will not complain. I was able to get washers from Laurie(?) at the Horolovar store. They also replaced my mainspring and serviced it. Timesavers had some washers...
  12. K

    Kundo Clock Help Needed

    Rough and Kurt I cannot find the one in the picture. Must have lost it. Tried to get some from Timesavers but they are way big. Can't find anyone who sells them online? Please let me know if I am missing something
  13. K

    Kundo Clock Help Needed

    No tension washer to be found .Will get an order out. Thanks Kurt I'll let you know how it goes when get washer.
  14. K

    Kundo Clock Help Needed

    When I touch the hour hand and the minute and is between 7 and 11 it will drop back wards 5-7 minutes each time until it hits 6.
  15. K

    Kundo Clock Help Needed

    Hello. My Kundo miniature was running fine for 3 days and this am the minute hand had stopped moving at the 7. The clock is still humming along but the hand won't move. Any suggestions please?

Forum statistics

Threads
165,465
Messages
1,440,338
Members
86,246
Latest member
davehetfield
Encyclopedia Pages
1,101
Total wiki contributions
2,873
Last edit
Weekly News 7/7/19 by Tom McIntyre