kellycru5's latest activity

  • K
    kellycru5 replied to the thread Kundo Clock Help Needed.
    Hello. Still running 26 hours later! These are the first 2 clocks I have ever worked on. I don't know how you guys do it. It must...
  • K
    kellycru5 replied to the thread Kundo Clock Help Needed.
    Wayne if you look back at #20 I have the washers aligned on the cannon pinion but have added a 3rd tension washer. It seems to be...
  • K
    kellycru5 replied to the thread Kundo Clock Help Needed.
    Still running 2 hours later. Put second tension washer in, in this configuration. Hour hand,(, I, ), front of works case. The...
  • K
    kellycru5 replied to the thread Kundo Clock Help Needed.
    Hey Rough. so I put the bent edge facing out against the flat washer (so the cup is facing inwards to the plate). The flat washer then...
  • K
    kellycru5 replied to the thread Kundo Clock Help Needed.
    Hi. Well tore the Kundo mini down. With hands it stops in 10 minutes. Hands off has been going now for 5 hours. Any suggestions on...
  • K
    kellycru5 replied to the thread Kundo Clock Help Needed.
    Well took the hands off and still stopping in about 40 minutes. Guess I will tear down and start over. Thanks all
  • K
    kellycru5 replied to the thread Kundo Clock Help Needed.
    Removed the hands and face and started from scratch from the washer on pinion shaft out wards. I don't think I am getting enough and...
  • K
    kellycru5 replied to the thread Kundo Clock Help Needed.
    After a week of running and keeping good time the Kundo mini just stopped. Everytime I start it it stops within 10 minutes. Did not...
  • K
    kellycru5 replied to the thread Kundo Clock Help Needed.
    Working on it but I'll give a few days before I'll know for sure
  • K
    kellycru5 replied to the thread Kundo Clock Help Needed.
    Sorry that was a minute in 2 hour period.
  • K
    kellycru5 replied to the thread Kundo Clock Help Needed.
    So it has been 24 hours since I got the tension washer and the clock is humming along losing a little less than a minute a day. I will...
  • K
    kellycru5 replied to the thread Kundo Clock Help Needed.
    Rough and Kurt I cannot find the one in the picture. Must have lost it. Tried to get some from Timesavers but they are way big. Can't...
  • K
    kellycru5 replied to the thread Kundo Clock Help Needed.
    No tension washer to be found .Will get an order out. Thanks Kurt I'll let you know how it goes when get washer.
  • K
    kellycru5 replied to the thread Kundo Clock Help Needed.
    When I touch the hour hand and the minute and is between 7 and 11 it will drop back wards 5-7 minutes each time until it hits 6.
  • K
    kellycru5 replied to the thread Kundo Clock Help Needed.
    Hello. My Kundo miniature was running fine for 3 days and this am the minute hand had stopped moving at the 7. The clock is still...

Forum statistics

Threads
165,438
Messages
1,440,111
Members
86,228
Latest member
4040eddym
Encyclopedia Pages
1,101
Total wiki contributions
2,873
Last edit
Weekly News 7/7/19 by Tom McIntyre