Most visitors online was 4107 , on 14 Jan 2023
J
John P
Latest activity Postings Post Areas About Post areas
-
-
JJohn P replied to the thread Help Help setting up (Timing/Strike/Chime) on Jauch P.L.78 CM Movement.Teetopp, that triple chimer is not the easiest one to learn chime basics. hopefully you took lots of pictures. If you are interested...
-
JJohn P replied to the thread Seth Thomas no 2 regulator - need help in replacement of suspension spring.That post should be pressed out and replaced. We have delt with that issue on the #2's more than once. Often one side will be twisted or...
-
JJohn P replied to the thread HOW would you repair this pulley ?.Tea, worn saddles are hard to re bush and get them to hang straight and match one another. I have tried several times, and was not...
-
JJohn P replied to the thread Anyone seen those long case clock gongs with just 4 rods?.Colonial Clock Co. used that set with the Winterhalder GF movement.
-
JJohn P replied to the thread Cleaning Chapter Ring?.We use a "magic eraser". White foam pad I stole from the wife. johnp
-
JJohn P replied to the thread How long does it take you to fit 20 bushings (in a hermle 0451 or 1151) using a bushing machine or milling machine? Please let me know?.I think it's a good idea to examine a movement before taking it apart, including the verge. This will determine whether or not to...
-
JJohn P replied to the thread WINTERHALDER GRANDFATHER understanding chime correction..Top wheel is chime lock. When chime select disk rotates to next slot and pin drops in,,,. chime is stopped by that upper wheel. Chime is...
-
-
JJohn P reacted to Willie X's post in the thread How long does it take you to fit 20 bushings (in a hermle 0451 or 1151) using a bushing machine or milling machine? Please let me know? with
Like.
I've written about these several times. You may want to search the word 'scribe' or 'concentric circle'. These are a big help on badly... -
JI am attempting to restore this older Winterhalder clock movement. The chime correction feature is AWOL. There seems to be a missing...
-
-
JJohn P replied to the thread Bushing blunder advice on ansonia crystal regulator movement.You won't find the following repair in any clock manual. It was shown to me by an old clock master now deceased. One can resize a...
-
JJohn P replied to the thread Jauch PL 42 Secrets?.I have done dozens of those Urgo's 32 movements and have never seen that feature. When i assemble them, i would bring both that chime...
-
JJohn P reacted to Willie X's post in the thread Help Brass sometimes turns dark copper color in ultrasonic...Why? with Like.
Try a 6 minute run time at room temperature. Go another 6 minutes if necessary. IMO, a lot of people are using way way to much heat...
-
JJohn P replied to the thread Help with examples.That is an odd one. I would try to restore it, to keep the original on the clock.
-
JJohn P replied to the thread Jauch PL 42 Secrets?.If you put the lip on the inside, it interferes with the end play of the arbor, might want to check that. Push the arbor in and out and...
-
JJohn P replied to the thread History ID beautiful decorative mantle clock.2 equally shaped paint can openers work great for a job like that
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
Know Your NAWCC Forums Rules!
RULES & GUIDELINES
RULES & GUIDELINES
Forum statistics
- Threads
- 181,572
- Members
- 54,871
- Latest member
- TUFTYDOG
- Encyclopedia Pages
- 918
- Total wiki contributions
- 3,137
- Last edit
- Pocket Watch Regulator by Kent