Most visitors online was 4107 , on 14 Jan 2023
-
-
JBerntd Pinion teeth can of course be repaired to proper efficiency using various methods that will fill in worn metal pockets...
-
JJeff T replied to the thread Seth Thomas Mayland chime rods way off key.make a jig to hold the movement and the good sounding chime block and see how it sounds if it sounds good just get another chime block...
-
JJeff T replied to the thread Ansonia Clock Misses Hour Strike.grooves and worn spots on the levers can cause this file out or replace as needed
-
JI’ve never found the length (within reason) of the suspension spring to have any significant affect on timekeeping. Yours is a head...
-
JJeff T replied to the thread Compatible chain..pinch the links close on the old chain or get both sizes and see with slips less
-
JJeff T replied to the thread Cuckoo Musicbox Binding.make sure the wire does not interfere with the fan when its stopping the fan must be free to hit the plastic tubing to stop
-
JJeff T replied to the thread Hermle 340-020A Chime gear removel.heat the hub of the gear, someone may have threaded the shaft, turn to left when taking off , they would then use the nut as a jam nut...
-
JJeff T replied to the thread Another Cuckoo Question.turn the eye on the bellows vertical so the lift wire stays in place . slow things down with your finger on the fan when advancing the...
-
JJeff T replied to the thread Hermle 340-020A Chime gear removel.heat it... someone may have put loctight or similar on it
-
JIn this picture, isn't the center lever pointing at about 4:00 on the front and going ccw as seen? Shouldn't the lift wire be on the...
-
JJeff T replied to the thread Gilbert passing strike problem.180 degrees from the hour strike .... perhaps the 1/2 hour lever is bent ?
-
JJeff T replied to the thread Wear question.online metals is another source for metal
-
JIf it was mine, I would continue to straighten the teeth using smooth jawed pliers and a light touch. You will need to measure between...
-
JIt looks like you have a cuckoo quail movement. The quail peeps on the quarters and has it's own bellow. Vernon
-
JJeff T replied to the thread Cuckoo Movement Identification.that one will need the heavy weights about like a 8 day uses
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
Know Your NAWCC Forums Rules!
RULES & GUIDELINES
RULES & GUIDELINES
Latest posts
-
-
-
-
-
French Onion, Chataignier Etienne à La Rochelle, ca. 1690
- Latest: eric the bully
Staff online
-
John HubbySenior Administrator Emeritus
Forum statistics
- Threads
- 184,068
- Members
- 56,019
- Latest member
- jedmas
- Encyclopedia Pages
- 918
- Total wiki contributions
- 3,195
- Last edit
- Waltham's Canadian Railway Movements by Kent