Most visitors online was 1990 , on 7 Feb 2022
-
gvasale replied to the thread Places of Interest in CT?.Springfield Armory, Springfield, Ma. Used to make firearms for the US for many years until closing around 1960 something. Worcester Art... -
Here's a photo of the rear of the movement. Remember, from an earlier post, one hammer strikes to the side, and there's only Patent...
-
-
gvasale replied to the thread S. Marti Lifting Piece Cracked.Laser welding is the way to go. Check your area for that service.
-
gvasale replied to the thread Dial with 6 Indicators.I have seen two on either FB marketplace or craigslist in the last month or so. New England area.
-
gvasale replied to the thread Soldering post bearing.You say there is a hole. If the fit is reasonably good, like not way oversize, clean and flux the hole. Then using a fine gage rosin...
-
gvasale replied to the thread Looking for identification and estimated value help!.I forgot to add...these prices were set by the owners. No haggling at all..
-
gvasale replied to the thread Looking for identification and estimated value help!.I presently have 2 Colonial tall clocks. One, from what the owner said had been in the family for a number of years. It's dial is thin...
-
gvasale replied to the thread Bigelow Kennard tall clock.A closer examination reveals it definitely is for a tube. 2 screws are for hanging a tube. Now to find the right tube! I really like the...
-
-
gvasale replied to the thread Bigelow Kennard tall clock.Thanks. I suppose that's a possibility. The hammer on the side has an adjustable rebound bumper. A spring- loaded piece of wood.
-
gvasale replied to the thread Bigelow Kennard tall clock.Seatboard etc with possible location for wire gong.
-
-
gvasale replied to the thread Bigelow Kennard tall clock.Chime tube bracket showing side swinging hammer
-
-
-
-
Today I picked up this clock which has a 4 tube chime operating on a long horizontal "drum." Hammers operate in a vertical position as...
-
gvasale replied to the thread Schatz noise maker.This escapement was a pretty fancy product. Merritt's had them listed as Swiss Platform escapements. They were expensive about C note...
Forum statistics
- Threads
- 175,282
- Messages
- 1,533,212
- Members
- 52,659
- Latest member
- Rajo
- Encyclopedia Pages
- 1,063
- Total wiki contributions
- 2,972
- Last update
- -