Recent content by GjP

  1. G

    New York New York Self Winding Clock

    Alan, thanks for the info.
  2. G

    New York New York Self Winding Clock

    Just purchased this a couple of weeks ago and finally got it up on the wall. I believe it's a #16 but I've seen some sites say a #9. It has a rotary movement but only 2 sets of coils not the usual 3 sets. Wood is blk walnut came out really nice after all the dirt and dust was removed. On the...
  3. G

    Help ID this E. Howard

    All thanks for the info.
  4. G

    Help ID this E. Howard

    Found this in a basement garage of an older home in PA. It had been there for several years. The Couple said they had inherited it and it was supposed to have hung in a College. I found a paper inside stating it was a bell system Old Main. I was siting on a couple of old saw horse stands and...
  5. G

    Atmos Question

    Still running strong and keeping time.. just an update
  6. G

    Atmos Question

    Here's the picture the one on the right..
  7. G

    Atmos Question

    I also thought I may be a dirty mainspring. But before taking things apart I thought I would check everything one more time. Last night I brought the clock back down to my bench and removed the case and bellows again. I check the bellows movement from chilled to room temp, it moves 10 to 12 mm...
  8. G

    Atmos Question

    How many times should you be able to compress the spring before you reach the equilibrium?
  9. G

    Atmos Question

    Hello. I recently purchased an Atmos clock, the baby Atmos. It will run for 3 or 4 days then stop. Sometimes when it stops the minute hand will spin freely. If I reach in and manually wind the mainspring with my finger the clock will run again. It runs and keeps accurate time. But in a couple of...
  10. G

    Help With Tavern Clock ID

    As All ways thanks for all the good information. gjp
  11. G

    Help With Tavern Clock ID

    Thanks for all the info. Yes it's a pretty plain looking clock. It looks like it may be made of pine there are several knots in the wood. It has retaining power but doesn't have a spring . It has a set of pins on the gear which engage to retain power when winding I think. Should have taken a...
  12. G

    Help With Tavern Clock ID

    Recently purchased this clock just trying to see if anybody can help with identifying the age and maker. No marks on the works or anywhere on the face or case I can see. There are several names and dates penciled in on the inside of the case. The names seem to be possibly people or workers of...
  13. G

    Cuckcoo Clock Question

    Thanks for all the good info.
  14. G

    Cuckcoo Clock Question

    I recently purchased this Cuckcoo clock and would like to know who made it and how old it is. I purchased it at a local antique shop and they didn't know. It was very dirty and the bellows material was so old it just fell apart. I ordered new bellows tops from TS and cleaned and oiled the...
  15. G

    Warren Master Clocks - How many out there?

    Hello all. I just recently purchased a Warren Type B in Walnut. I was doing a little research on how to set it up and what the large hand was for and I came across this article and thought I share a picture of mine. Just finished getting it back together, took a couple of days to get the...
Our 2021 National Meeting in Hampton Roads Virginia
Topic related ad experiment
Know Your NAWCC Forums Rules!
RULES & GUIDELINES

Find member

Forum statistics

Threads
160,940
Messages
1,396,177
Members
82,923
Latest member
tcbarnard70
Encyclopedia Pages
1,099
Total wiki contributions
2,788
Last edit
How to wire a 24 volt secondary for a 12 volt ITR/IBM Master clock system by Toughtool