Most visitors online was 4107 , on 14 Jan 2023
-
-
Ddigitalblsphemy replied to the thread Master 400-Day Made in Japan..I have a similar supposed 400 day clock. Yours appears to be running. I would let it be until such time as it needs it. If it ain't...
-
Ddigitalblsphemy replied to the thread Ansonia chime hammer issue.I'm checking into that now. Because of how the chime barrel is mounted it's difficult at best. I do appreciate the feed back guys...
-
Ddigitalblsphemy replied to the thread Ansonia chime hammer issue.I can't find that chatter myself Willie X. It's like a grinding butterfly wheel but it's not. Only happens as it strikes the hour.
-
Ddigitalblsphemy replied to the thread Ansonia chime hammer issue.Maybe this will help
-
Ddigitalblsphemy replied to the thread Ansonia chime hammer issue.All 3 melodies will have the same symptom, however it is more pronounced in the 8 hammer sequence obviously. The Westminster will almost...
-
Ddigitalblsphemy replied to the thread Ansonia chime hammer issue.I concur with the sync, however it doesn't explain why the 1/4, 1/2 sequence will start and finish correctly. The 3/4 will not finish...
-
Ddigitalblsphemy replied to the thread Ansonia chime hammer issue.No RC, only the chime barrel/hammer assembly as a unit. Hammers dropped freely, etc. Saw no issues to cause what it's doing. Willie...
-
DI picked up this Ansonia Gold Medallion wall clock. It was delivered in bad condition. Five of the eight chime rods were broken off...
-
-
Ddigitalblsphemy replied to the thread Howard Miller Thomas Tompian - need advice.For information only, FYI If anyone should work on one of these in the future these are non dealer prices from Howard Miller. Triple...
-
Ddigitalblsphemy replied to the thread Howard Miller Thomas Tompian - need advice.Willie X Question, Look at the photos for the chime sets. The photo that shows the two ends together. The one on the left (silver...
-
Ddigitalblsphemy replied to the thread Howard Miller Thomas Tompian - need advice.Being that the cabinet is walnut, doubtful. The pins did not break away from the dial pan as I pried it off. There are holes in the rear...
-
Ddigitalblsphemy replied to the thread Howard Miller Thomas Tompian - need advice.look closely at the front wood panel and you will see the pins
-
Ddigitalblsphemy replied to the thread Howard Miller Thomas Tompian - need advice.I forgot Willie, there was no tape at all, only 4 pins holding the dial face
-
Ddigitalblsphemy replied to the thread Howard Miller Thomas Tompian - need advice.Willie X I have a new set which I assumed was complete. The mounting screw and holes are a different diameter. To make matters worse the...
-
-
Ddigitalblsphemy replied to the thread Howard Miller Thomas Tompian - need advice.Well great, I solved one issue. The chime set Merrits sold me are the wrong size screw and they are not even threaded. I'll have to call...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
Know Your NAWCC Forums Rules!
RULES & GUIDELINES
RULES & GUIDELINES
Forum statistics
- Threads
- 181,572
- Members
- 54,872
- Latest member
- Cgilson
- Encyclopedia Pages
- 918
- Total wiki contributions
- 3,137
- Last edit
- Pocket Watch Regulator by Kent