![IMG_20230811_144224[1].jpg](/data/attachments/691/691555-2738d8da687ada2d9153fd844355b695.jpg)
Most visitors online was 4107 , on 14 Jan 2023
-
-
bchaps replied to the thread New member, longtime lurker.I can assure you Stracq your decision to avoid difficult repairs until your skill levels provide you with confidence to handle them is... -
bchaps replied to the thread FREE Hermle Movement.That's what I was thinking...may still have good steel pivots.
-
bchaps replied to the thread Authentic History Help Movement.I can't confirm for the entire world, but I have never seen four winding arbors on anything coming into my shop. I have seen a Sessions...
-
-
bchaps replied to the thread clock courses.I'll re-emphasize earlier comments lauding the talent present in this forum. Although I've seen several "high-end" clocks come through...
-
bchaps replied to the thread "L&R #677 Must NOT be used Directly in an Ultrasonic Cleaning Tank" ?????.Thanks all... my confusion was caused by the statement "this SOLUTION" must not be used directly. I understand NOT placing clock parts...
-
bchaps posted the thread "L&R #677 Must NOT be used Directly in an Ultrasonic Cleaning Tank" ????? in Clock Repair.I am confused! For 10 years in an earlier life I poured #677 directly into my L&R Ultrasonic cleaning machine. Now, I'm back and...
-
bchaps replied to the thread Can't get Twelve Strikes!!!.SUCCESS!!! I cleaned up the rack tail bend angle to 45 degrees as pictured in TracerJack's post above. FAIL!...Still produced...
-
bchaps replied to the thread Can't get Twelve Strikes!!!.THANK YOU !!!! Bill
-
bchaps replied to the thread Can't get Twelve Strikes!!!.Willie...thank you. It's past midnight and I couldn't get this out of my head so I'm back in the shop to re-think this issue again. My...
-
The clock in question is a Seth Thomas A200 in very nice condition. It has been thoroughly cleaned, lubricated, placed in very close...
-
-
bchaps replied to the thread Need Replacement "Rings" for ST A200 Mounting Brackets.Thanks all.. picked up split rubber grommets and "split" them with an Exacto. Super glue and several minutes in the vise seems to have...
-
-
bchaps replied to the thread Emperor Clock with Hermle Movement Questions.This is a Picture of a very old Ansonia #42 Regulator movement pallet. The client didn't want to pay for Findley-Cox to make a new...
-
-
bchaps replied to the thread Steel Wire for this Mainspring Clamp?.A spool of "Rebar Wire" at Lowes is about $10.00 and it worked fine in this instance. The older T/S clocks generally work with the Flat...
-
I prefer to not re-invent the wheel when some of you may have already worked through this issue. The rubber grommets on the ST A200 TS...
-
-
bchaps replied to the thread Steel Wire for this Mainspring Clamp?.Thanks Willie. Picking up a spool of wire tomorrow. Bill
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
Know Your NAWCC Forums Rules!
RULES & GUIDELINES
RULES & GUIDELINES
Staff online
-
Philip MorrisChair, Museum Collections
Forum statistics
- Threads
- 184,070
- Members
- 56,020
- Latest member
- audreydargie
- Encyclopedia Pages
- 918
- Total wiki contributions
- 3,195
- Last edit
- Waltham's Canadian Railway Movements by Kent