Just a little update I went to the IWC store in Manhattan which they had a watchmaker on staff The movement is a caliber 95 and if I wanted it fixed it would have to be shipped to Switzerland because they don’t make the parts anymore The balance staff is a 1358 which you guys have told me
Hello everyone I trying to look up this movement to find a new balance staff and maybe dial. Wonder if anyone could help more information about the movement is it real and so on.
please let me know thank you here are pictures of the IWC
Staff pic is very hard to take sorry
The movement says...
I have this movement an Elgin 18s
The plate is stamped 17 Jewels but when counting the jewels I count 15
The serial # when I look up says it’s a grade 82 GM wheeler 15 jewel?
what’s the story with this movement? Can anyone help
So I have assemble the movement with a new staff, which works great! But now I have a problem when I screw down the top plate the stem winds and clicks. but no power is given to the train. I remove the barrel and fork and screw down plate tight all gears move freely. Re install the barrel and...
Thank you so much. I measured the staff which was broken but it looked like just the pivot tips were missing and that’s where I got that measurement but I will look into those models for the Staff rondo and best fit
I will let you know
Hello everyone I need your help . I have a Longines Wittnauer AFUS Army type AII
I took apart the whole movement and I cannot find what caliber or what model this movement is I have searched everywhere throughout the Internet and cannot find any information what I would like is a balance staff...
Hello all thanks everyone that helps, because every time I need help NAWCC is there!
I would like to identify a Pocket Watch that I found in my collection it runs very well I just would like to know more information about it. the serial number on the face of the movement is, 489310. Depose...
Thank you funny you say that I purchased a model 1857 staff and tried the staff, it was to short and the collect didn’t fit was to small on the staff. Any other ideas that you suggest?
also for my knowledge how to heck do you figure out these PW are fake or not. Just for the serial #. Like...