Goal: $300, Received: $90.00 (30%) Contribute Now
Donate whatever you can or Join the 14,000 other NAWCC members for only $80 (plus $10 for hard copy publications). Check it out here.

Page 3 of 4 FirstFirst 1234 LastLast
Results 31 to 45 of 54
  1. #31
    Registered user.
    Join Date
    Nov 2016
    Location
    Knoxville, TN
    Posts
    22

    Default Re: Watch Parts Wanted (By: Cary Hurt)

    I'm looking for a 992b gold center wheel and canon pinion.
    Thanks

  2. #32

    Default Re: Need 60hr. motor barrel screws (3) for Bunn Special (By: richiec)

    Hi,

    I am looking for a balance hairspring for a grade 58 Elgin. The hairspring part no. is 793. I'm not sure of equivalents for this grade, but if someone has an extra that they can part with, or can direct me to where I can obtain one, it would be much appreciated. The Elgin serial no. is 141433.

    Thanks,
    Rick

  3. #33

    Default Re: Need 60hr. motor barrel screws (3) for Bunn Special (By: Rickpo)

    I could use a 14 size gold filled hunting case. It wouldn't matter if it's missing the stem + crown.

  4. #34

    Default Re: Need 60hr. motor barrel screws (3) for Bunn Special (By: NC Plumber)

    WTB Seiko Monaco Automatic Chronograph Dial

    In needed of a dial for a Seiko Monaco (17 jewel) Chronograph Automatic Model# 7016-5011, most of the 5,000 series will fit. These dials a square shape. Just about resigned to take any colour, also will take a complete parts watch if you do not want to separate the dial.
    Best Regards

  5. #35
    Registered user. roughbarked's Avatar
    Join Date
    Dec 2016
    Location
    Western NSW, Australia
    Posts
    1,525

    Default Re: Need 60hr. motor barrel screws (3) for Bunn Special (By: Bila)

    I've got parts everywhere but most of them came as partly disassembled watches and clocks, stuff tossed in boxes. I'd need to sit down and measure it all up.The fact that it hasn't happened over the past thirty years means that I'm going to have to be of sound mind for another thirty to be able to make use of any of it.

  6. #36
    Registered user. ANDY YALE's Avatar
    Join Date
    Jun 2013
    Location
    Jersey City, NJ
    Posts
    463

    Default Re: Need Silver Art Deco Hands for Elgin 12s (By: sderek)

    message Marty Bell, he is the go to guy for pocket watch hands. Tell him Andy Yale sent ya.

  7. #37
    Registered User Curtis Jackson's Avatar
    Join Date
    Apr 2009
    Location
    Columbia, Tennessee
    Posts
    736

    Default Re: Watch Parts Wanted (By: ANDY YALE)

    In need of a Waltham escape wheel part number 1693A for:

    Waltham 18s model 1892, grade 845 with double roller, round back pallet fork. Must have conical pivots, not square shoulder pivots.

    Thanks!

  8. #38
    Registered User Jim Haney's Avatar
    Join Date
    Sep 2002
    Location
    Decatur, TN.
    Posts
    4,950

    Default Re: Watch Parts Wanted (By: Curtis Jackson)

    I need a 4th wheel w/ Pinion for a regular Hamilton 992B.

    Part # 661042
    Jim Haney

  9. #39

    Default Re: need jewels (By: richiec)

    I need the hole and cap jewel for a waltham cock arm
    waltham (model 1883)
    cockarm number (318567)

  10. #40
    Registered User richiec's Avatar
    Join Date
    Feb 2007
    Location
    Brick, Ocean, NJ
    Posts
    5,349
    Blog Entries
    2

    Default Re: need jewels (By: Juggernaut)

    Juggernaut, you would need to provide the entire serial number and possibly the pivot size on the balance arm to help you as the pivots go from 8-14 and there may have been changes to the parts over time. Pictures of the movement also help immensely.

  11. #41
    Registered user.
    Join Date
    Dec 2014
    Location
    Edwardsville, IL
    Posts
    85

    Default Re: Watch Parts Wanted (By: Cary Hurt)

    need a U.S watch co. (marion) parts movement. must be a 15j early model. dont need any balance parts. just train jewels mainly.

  12. #42

    Default Re: Need 60hr. motor barrel screws (3) for Bunn Special (By: richiec)

    I need am Elgin ladies 617 movement with a good balance or a complete balance for that movement.
    This is for a family member and quite important. I would be more than glad to pay you for the part.
    There is a lot of older small ladies watches and movements out there and hoping someone can help. Thanks

  13. #43
    Registered User Jim Haney's Avatar
    Join Date
    Sep 2002
    Location
    Decatur, TN.
    Posts
    4,950

    Default Re: Need 60hr. motor barrel screws (3) for Bunn Special (By: RL)

    Quote Originally Posted by RL View Post
    I need am Elgin ladies 617 movement with a good balance or a complete balance for that movement.
    This is for a family member and quite important. I would be more than glad to pay you for the part.
    There is a lot of older small ladies watches and movements out there and hoping someone can help. Thanks
    RL,
    Send me a PM. I have a movement with a good balance.
    Jim Haney

  14. #44
    Registered user.
    Join Date
    Apr 2015
    Location
    Lincs, UK
    Posts
    265

    Default Riverside model 1908 (By: Jim Haney)

    looking for the winding wheel and ratchet wheel for a Waltham model 1908 Riverside - happy to pay for junk movement but I just need the two demask wheels with the 'twisted rope' pattern

  15. #45
    Registered user.
    Join Date
    Dec 2014
    Location
    Edwardsville, IL
    Posts
    85

    Default Re: Watch Parts Wanted (By: Cary Hurt)

    i need a saftey roller for a waltham 1892 model. double roller. (crescent st.)

Similar Threads

  1. watch parts wanted
    By 6789 in forum Watch Repair
    Replies: 0
    Last Post: 02-23-2013, 04:01 PM
  2. Russian pocket watch parts wanted
    By 6789 in forum Watch Repair
    Replies: 0
    Last Post: 02-23-2013, 03:00 PM
  3. Watch Parts Wanted
    By raiser in forum Watch Repair
    Replies: 17
    Last Post: 12-10-2012, 08:51 AM
  4. Speaking of Marion watches-parts needed
    By Jon Hanson in forum American Pocket Watches
    Replies: 1
    Last Post: 01-14-2001, 04:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •