Thread: Clock Parts Wanted
09-18-2010, 05:50 PM #1
Clock Parts Wanted
Post your requests for parts needed to complete your repairs/projects here. Use the Private Message function to make your deals. Post a followup when your requirements have been met, so we can delete your posts, and keep this thread managable. After about a month, your post will be moved to the non-sticky parts wanted thread.
To view all older posts, Click Here. When responding to one of the older posts, use a Private Message to the person needing the part.
Last edited by harold bain; 12-14-2013 at 08:36 AM.harold bain, Member ch 33
"If it won't "tick",
let me "tock" to it"
01-15-2017, 12:35 PM #2
- Join Date
- May 2010
- post falls idaho
Re: Clock Parts Wanted (By: harold bain)
Hi all, I am looking for a plastic motor gear for a Jefferson golden hour clock
01-16-2017, 07:46 AM #3
02-16-2017, 07:43 PM #4
Looking for an Ingraham Banjo Clock Finial - Do you have one? (By: harold bain)
I am looking for a finial for my restoration project on an Ingraham 35" tall banjo. Looks like most of the finials were just like the one in this picture. Does anyone have one for sale?
Thanks in advance! Rich
02-17-2017, 08:04 AM #5
02-17-2017, 01:06 PM #6
Re: Looking for an Ingraham Banjo Clock Finial - Do you have one? (By: R. Croswell)
Timesavers does have the chain for a Jefferson 'Suspense', but I also need the dial/hands assembly.
Hoping somebody's got a busted frame or something, out there.Living life at eight beats per minute.
02-18-2017, 08:52 AM #7
Re: Looking for an Ingraham Banjo Clock Finial - Do you have one? (By: MartinM)
Timesavers lists hands as part of their parts list. Try calling them - 480-483-3711. The also list http://www.roger-russell.com/jeffers as a source for information and parts.
edit: when trying the link, it doesn't want to work. Start with www.roger-russell.com and go from there to the Jefferson clock page.
Last edited by shutterbug; 02-18-2017 at 09:00 AM.A man with a clock always knows the time. A man with two clocks is never sure.
02-20-2017, 04:06 AM #8
Re: Looking for an Ingraham Banjo Clock Finial - Do you have one? (By: shutterbug)
I should have ordered the chain before posting, here. The chain is no longer showing on the Timesavers site. The hands are different for the Suspense, so the Golden Hour hands they have won't work. I suppose I could try and make my own parts; But the effort will be significant.Living life at eight beats per minute.
02-24-2017, 12:28 PM #9
Ingraham "Nyanza" banjo parts needed... (By: harold bain)
I am in need of a set of hands, a hand nut, an escape wheel, and a verge and crutch for a Nyanza. If you can supply any or all of the above parts please contact me, either by phone (401-742-2112) or PM. Thanks very much.NAWCC 25131
03-08-2017, 12:59 AM #10
Re: Ingraham "Nyanza" banjo parts needed... (By: Peter A. Nunes)
Am looking for an 8 hammer Assembly for an English Triple Fusee Bracket clock. If complete assembly is not available but even those heart shaped hammers are, pl PM me.
Thanks"Be nice to the people on your way up because you will meet them on your way down."
03-26-2017, 07:56 PM #11
- Join Date
- Mar 2017
Re: Clock Parts Wanted (By: prideofmatchingham)
Hello, I'm looking for a less damaged Telechron/General Electric 12" electric clock face, like for the 1H1312 or similar model. My recent find has a lot of flaked off paint and rust. Any recommendations aside of e-Bay?
04-02-2017, 02:09 PM #12
Kienzle R/A Pendulum (By: cornell9)
I picked up a Kienle Vienna type today needing a pendulum. The movement is marked with ah 54 so it should need a 54 cm pendulum. The pendulum hanger looks like an inverted "T" with the crossbar about ¼ inch wide. I presume that it is a R/A style pendulum that is missing. If you have one you can part with, please let me know.
WaltSo many clocks to love.....So much time on my hands!
04-05-2017, 08:16 AM #13
Re: Kienzle R/A Pendulum (By: Walt Wallgren)
I was able to get a picture of what the pendulum hanger looks like. This is not my clock, just a picture of the hanger. Please let me know if you can help.
So many clocks to love.....So much time on my hands!
04-06-2017, 08:36 AM #14
Re: Wanted Round French Movement for Black Forest Clock (By: harold bain)
I'm in need of a round French bell-strike movement with a glass bezel for an old Black Forest clock case. The case movement opening is 4" in diameter and 5" deep. The current movement is a replacement and while the pendulum is correct for the movement (4-1/2") it is too long for the case. The case requires a 3" to 3-1/2" pendulum length (as indicated by the numbers typically found on the movement back plate, lower center...Pouces & Lignes). I need a plate marked "3 0" to maybe "3 8" (ie. I can modify the case opening floor slightly, maybe 1/2-3/4"). I do not need the bell, pendulum (I have several that will work) or the rear case/movement door. A few pics are attached of the case opening & current, incorrect movement. I know it's a stretch but I thought someone may have a movement lying around. Thanks.
Last edited by devore; 04-06-2017 at 09:02 AM.
04-12-2017, 03:32 PM #15
Re: Wanted Round French Movement for Black Forest Clock (By: devore)
Pendulum for Kundo Quartz Anniversary
I need a pendulum for this nice little Kundo. (Pardon out of focus.)
It's low clearance-- pillars are only 3" high, pendulum needs to be less than that. Kundo pendulums have a top hook to take a regular tension suspension spring. A regular (mechanical) pendulum would probably work, if it's short enough. Any help will be GREATLY appreciated.
I'm posting this to Electric Horology and Tension Clocks, as well as Clock Parts Wanted.
Last edited by bangster; 04-12-2017 at 10:56 PM.
- Check out the Repair Hints & How-To's forum. You may find your answer there.
By Sammyt97 in forum Clock RepairReplies: 975Last Post: 01-09-2017, 09:19 AM
By Don DeMarcus in forum Clock RepairReplies: 59Last Post: 09-18-2010, 08:31 PM
By harold in forum Electric HorologyReplies: 0Last Post: 11-22-2006, 03:33 AM
By shutterbug in forum Clock RepairReplies: 6Last Post: 09-01-2006, 09:16 AM