Goal: $300, Received: $55.00 (18%) Contribute Now
Donate whatever you can or Join the 14,000 other NAWCC members for only $80 (plus $10 for hard copy publications). Check it out here.

Results 1 to 4 of 4
  1. #1

    Default hermle movement 1161-853 H.S. 114/60

    Hello
    I have a Hermle 1161-853 H.S. movement (winding holes all aligned) and the center pulley is not aligned with the others (not turned the same way) The barrel can go in only one way and the cable, one spot to the support of the movement. May this be the way it is? Thanks John
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_1283.jpg 
Views:	781 
Size:	197.3 KB 
ID:	350282  

  2. #2

    Default Re: hermle movement 1161-853 H.S. 114/60 (By: john 05)

    John, for you and ME, I hope some one who reads this will tell you what you are wanting to know.

  3. #3

    Default Re: hermle movement 1161-853 H.S. 114/60 (By: john 05)

    The cables ends are attached to the center of the movement front to back.. At the full up and down of the cable on the drum, it will go from one end to the other and only be at the center of the drum only when half way down. The pulleys are tilted opposite because the ends are both attached to the same center plate.

  4. #4

    Default Re: hermle movement 1161-853 H.S. 114/60 (By: MARK A. BUTTERWORTH)

    Thanks for the reply, most of the cable weight clocks, when all the weights are up, the pulleys are in the same angle at the top. (all three) This movement was only made for a short time (three winding hole in a line). maybe this is normal for this movement. Thanks John

Similar Threads

  1. Replies: 22
    Last Post: 11-04-2016, 10:39 PM
  2. Replies: 6
    Last Post: 05-08-2016, 06:44 PM
  3. Hermle 1161-853 movement issues
    By amstel145 in forum Clocks General.
    Replies: 3
    Last Post: 01-26-2016, 10:32 PM
  4. Broken Hermle 1161-853 HS movement, 114cm
    By ChrisM54342 in forum Clock Repair
    Replies: 7
    Last Post: 04-19-2010, 08:26 PM
  5. Hermle 1161-853 spring on seconds arbor
    By rlspinden in forum Clock Repair
    Replies: 8
    Last Post: 09-24-2008, 05:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •