Goal: $300, Received: $160.00 (53%) Contribute Now
Donate whatever you can or Join the 14,000 other NAWCC members for only $80 (plus $10 for hard copy publications). Check it out here.

Results 1 to 6 of 6
  1. #1
    Registered User George Nelson's Avatar
    Join Date
    Oct 2007
    Location
    Tennessee
    Posts
    698

    Default Terry Type 1.111 Movement Questions

    Hello, Clock Lovers!

    I have a couple of hopefully simple questions.

    I'm trying to find a home for a Terry type 1.111 wood movement. This is a short pendulum movement. I know that this movement is appropriate for either an Eli Terry or an Eli Terry and Sons pillar and scroll. So...

    When were these movements first made?
    How long were these movements made?
    Were they used in anything other than P&S cases?
    Are these movements commonly found?

    Many thanks for your help! I hope these are not ridiculously elementary questions to all of the true experts out there!

    Best,

    George

  2. #2

    Default Re: Terry Type 1.111 Movement Questions

    Hello George,

    Per Clocknuts id chart - Terry 1.111 movements were used in Mark Leavenworth & Son clocks.

    Snowden Taylor's Bulletin article lists Lot Goodspeed as using this movement.

    Andy Dervan
    Last edited by Andy Dervan; 04-01-2017 at 07:07 AM.

  3. #3
    Registered User George Nelson's Avatar
    Join Date
    Oct 2007
    Location
    Tennessee
    Posts
    698

    Default Re: Terry Type 1.111 Movement Questions (By: Andy Dervan)

    Thanks for the help, Andy! Do you know if this movement was used by Terry and/or Terry and Sons themselves as well? The chart specifies only that they are the maker, and I hope I have assumed correctly that they were also users...

    Thanks,

    George Nelson

  4. #4

    Default Re: Terry Type 1.111 Movement Questions (By: George Nelson)

    Hello George,

    I always question the obvious answers, and would be curious with what other folks write.

    Andy Dervan



    Andy

  5. #5
    Registered User George Nelson's Avatar
    Join Date
    Oct 2007
    Location
    Tennessee
    Posts
    698

    Default Re: Terry Type 1.111 Movement Questions (By: Andy Dervan)

    Me, too, Andy. I hope to hear comments from those interested in this thread...

    George

  6. #6
    Registered User George Nelson's Avatar
    Join Date
    Oct 2007
    Location
    Tennessee
    Posts
    698

    Exclamation Re: Terry Type 1.111 Movement Questions (By: George Nelson)

    Hi, Folks,

    Just rereading some of my questionable posts. To clarify this thread: The original Snowden Taylor wood movement identification sheet that has been converted by Timesavers to a very usable and convenient EXCEL Spreadsheet, and is available on this Board, lists both makers and users. If a maker is listed without users (as in the case of Riley Whiting movements, for example), the the maker is the ONLY user. If a maker is listed along with users, then the movement in question will be found in products of all of the listed names, both makers and users. I'm so sorry for my stupidly worded and confusing initial questions!

    With apologies,

    George Nelson

Similar Threads

  1. Terry-Type Lockset Key Question
    By George Nelson in forum Wood Movement Clocks
    Replies: 3
    Last Post: 03-07-2017, 08:26 PM
  2. Eli Terry type 1.111 movement
    By clocksforfun52 in forum Wood Movement Clocks
    Replies: 3
    Last Post: 09-03-2013, 08:02 PM
  3. Seth Thomas #1 Terry Movement Question
    By ImPondering in forum Clock Repair
    Replies: 6
    Last Post: 08-13-2013, 10:10 PM
  4. Dust caps for Terry-type wood movements
    By George Nelson in forum Wood Movement Clocks
    Replies: 3
    Last Post: 05-13-2011, 09:08 PM
  5. Jeromes & Darrow 8 Day Type 4.111 Wood Works Movement Help
    By Lawman in forum Wood Movement Clocks
    Replies: 7
    Last Post: 12-19-2006, 11:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •