I have a SB 347 movement. Grade2, 17 jewel, single roller, 18 size . I need a roller table, jewel and balance staff. A complete balance assembly will work. Will 345 movement parts exchange?
I have all Ted Crom Books New First print. For sell at Frank.firstname.lastname@example.org or google ted crom books not amazon.
No matter if you collect Swiss, English, American, or any other watches form the wide world, you certainly have heared the name Roskopf. IN the 19th Century George Roskopf designed his famous inexpensive pin lever movement, soon renowned for great value and often copied by other makers as well.
photo - fr.wikipedia.org
I don't collect Swiss watches much, but I was always
Updated 03-21-2017 at 11:16 AM by pmwas
Help I have a welch #2 regulator with a two weight time only upside down movement the clock will run but when you put the second hand on it stop it has very little pendulum swing and I have had the clock rebuilt by a very well know clock guy bushings verge pinions new suspension spring the weights are what I feel are original they weigh 3.5 pounds each I really like the clock I just dont know where to go from here. Thanks
This time I'm facing a completely new chalenge.
I've already shown you this old rusty 19th Century verge watch, made in france circa 1830 - something told me the rust was NOT dealt with thoroughly, and I wanted to check myself.
Notice - I've NEVER yet worked on a verge watch, or on a fusee watch, so what I say here might be incorrect - this is no service manual
I'm always afraid - in such cases - of 'loosing' a working watch due to my error or just plain bad luck, but
Updated 03-15-2017 at 04:30 PM by pmwas