PDA

View Full Version : Pocket Watch ID


t.tom
05-03-2009, 12:54 PM
I need help identifying one of my pocket watches. It's an open face with a Defiance case. The only name on the face is a logo that looks like a A on a W on a C with a small o in the center. Inside the works have the same logo with U.S.A. below it. Ser#3212546, no other markings. It is old, not a repo. Thanks, Tom.

Veritas
05-03-2009, 01:13 PM
Hi Ttom, go this link and the information is there for your watch.
http://www.nawcc-info.org/WalthamDB/LookupSN.asp

Enter your serial number in to the black and press enter.

Jon Hanson
05-03-2009, 01:53 PM
.................assuming it is a Waltham; I am not convinced!

Kent
05-03-2009, 02:50 PM
Hi Tom:

Welcome to the NAWCC American Pocket Watch Message Board!

It may be best if you could post a picture of the movement (the "works"), the clearer and sharper, the better, other pictures will help a little, but this is the most important. On the chance that it is not a Waltham, we may be able to identify it by the shape of the plates.

To post an image, scroll to the top of the thread and click on "FAQ," then scroll down to "vBulletin FAQ" and click on the "How to post images" and follow the instructions. Note that there is no indication of attaching a file (picture) until you go to actually post your thread or your reply. The picture does not show up in the "Instant Reply" text box in which you've written your thread or your reply, nor does the picture appear in the "Preview." You can test your efforts in the Just Practicing and Learning Forum (http://mb.nawcc.org/forumdisplay.php?s=&daysprune=-1&f=28).

Its also helpful if you can post all the markings that are on the movement (the "works") in case they can't be seen in the picture(s).

Good luck,