South Bend Watch Part Needed

[GD1]

If anyone can direct me to a set spring for a South Bend Model 1, 0 size, seven jewel HC movement, it would be most appreciated. Thanks in advance.

[GD1]

If anyone can direct me to a set spring for a South Bend Model 1, 0 size, seven jewel HC movement, it would be most appreciated. Thanks in advance.

[jimbob2154]

You might try this link. It looks like they have what you need. DASHTO Horological Supplies (http://www.dashto.org/newlists/selectedamericanmaterial.htm#028)That link should take you to the page with your part. If not, go to the home page and then to the Site Map page. There is a whole list of different parts and supplies for all kinds of watches. Hope this helps you out. Scroll down close to the bottom of this page to number 028.281. jimbob (:{

[Jon Hanson]

The SOUTH BEND man is Lyle Stratton! (search these MBs for his email address)

[GD1]

Thanks for the info. I am trying DashTo first.

[Jon Hanson]

do do you have a part number?

[jimbob2154]

If it is a South Bend, 0s, set lever spring, the part number is #32934. All parts on the model 1 and model 2 are interchangeable except for the dial and the fourth pinion on the open face and the hunting case. The open face has no second hand and the hunting case does have a second hand. That, I'm pretty sure, is the only difference. jimbob (:{
JON: I've taken your advice and have been doing my R&R (reading & research). Thanks - it really helps a LOT!!!!! JB

EDIT:Lyle Stratton's email is: LDSwatches@cs.com
JB