PDA

View Full Version : Help in Identifying a pocket Watch


Kent
02-28-2005, 03:33 AM
Hi Matt:

Welcome to the NAWCC Pocket Watch Message Board!

The number 925 in a box probably indicates that the silver is .925 Fine.

It would be helpful if you could post a picture of the movement (the "works"), the clearer and sharper, the better. We may be able to identify it by the shape of the plates. In trying to open the watch, you might find the information in "How To Open A Pocket Watch Case" (http://www.knology.net/~ksinger/opencase.txt) useful.

Larry Jones has written up a useful article on Image Posting (http://www.larjones.com/data/imagehelp.html), which may be helpful.

Or, when you click on the Reply button, at the lower right-hand corner of the bottom post in a thread, the Reply To: box that opens has a text box. There is an "Upload an image" link just below the text box, on the left-hand side. Clicking upon the "Upload an image" link will open a field that allows you to select a picture file to attach to your post. Use the Browse button to navigate to the location in which the picture file resides on your disk drive and select it. Since this only permits one picture per reply, you can reply once for each picture.

If you have a problem posting the picture(s), you can attach it (them) to an e-mail to me (you can get my email address by clicking on my name in the upper left-hand corner of this post and viewing my Public Profile) and I'll post it (them) for you.

Its also helpful if you can post all the markings that are on the movement (the "works") in case they can't be seen in the picture(s).

Good luck,