Grant Perry
09-30-2002, 02:31 AM
HELP!!!
Good Monday morning all.
Technical question.... I have taken apart an Elgin Size 18 lever set pw to replace the mainspring. My problem is the pallet block. It fell out when I took it apart :frown: and now I cannot determine where it belongs. I assume that there should be a pallet fork or anchor, but.... The block looks like the one below in the link. Is there somewhere I can find a diagram that would detail the layout with this type of pallet block? I realize that it has to contact the escape, but I still need a visual (slow learner).
http://www.midwestcs.com/elgin/scans/tech_doc/patent_0077827_elgin_watch_pallet/m_p g01.html (http://www.midwestcs.com/elgin/scans/tech_doc/patent_0077827_elgin_watch_pallet/m_pg01.html)
Thank you!
Grant
[This message has been edited by Grantmjp (edited 09-30-2002).]
Good Monday morning all.
Technical question.... I have taken apart an Elgin Size 18 lever set pw to replace the mainspring. My problem is the pallet block. It fell out when I took it apart :frown: and now I cannot determine where it belongs. I assume that there should be a pallet fork or anchor, but.... The block looks like the one below in the link. Is there somewhere I can find a diagram that would detail the layout with this type of pallet block? I realize that it has to contact the escape, but I still need a visual (slow learner).
http://www.midwestcs.com/elgin/scans/tech_doc/patent_0077827_elgin_watch_pallet/m_p g01.html (http://www.midwestcs.com/elgin/scans/tech_doc/patent_0077827_elgin_watch_pallet/m_pg01.html)
Thank you!
Grant
[This message has been edited by Grantmjp (edited 09-30-2002).]